
23 may 2021 New made Kickstart Lever for Ducati Bevel Round Case 750 Yellow Sport and 750 Super Sport Green Frame

5 dezember 2020 Herman Jolink,did 102 km with his Old Lady (Ducati Bevel Mille S2) temprature about 3 degrees celcius, me and my Old Lady did together 240.000 kilometer

2 dez 2020 Close Up NOS Front Cyl Head Ducati Bevel with new made Closing Rocker and NOS open rocker, Camshaft turns smooth

6 november 2020, left Back Cylinder Head Ducati Bevel 750 GT -Yelloow Sport, Round Case with new in and exhaust valve seats, right Complete Back Cylinder Head new valve seats , new spark plug threat bush, new hard chromed Open Rockers new bearings to fit on the Ducati 750 GT round case engine build 1972

8 november 2020 Crankshaft Ducati 750 GT round case, new bigend pin needle bearings alu brons plates between crank half and Connecting rods, Balanced on 81.00 Forged J-E pistons

8 november 2020, Front and Back Cylinders with new 81.00 mm Forged J-E pistons, Cylinder Sleeves Honeyd at the right piston play

3 november 2020, New made Bronze Exhaust nuts, M 51.2 x 1.5-M 52.0 x 1.5-M 51.8 x 1.5, we can make every size you need
19-20 dez 2020 Central Classics we are there with allot Ducati Bevel parts for Ducati Bevel round and square case engines Houten Netherlands

24 october 2020 I get some sweet smillling red rooses In Dieren Netherlands and some food in the Netto Super Market in Isselburg Germany, my hart is singing wen i ride my Old Lady it whas yust 84 km but whas so nic so nice to ride my Ducati Bevel Mille S 2

24 octber 2020 making special tool to fit Junk ring in Marzocchi front fork leg Ducati Bevel 750 Round Case GT and Yellow Sport

Left front new made Clutch Cover for Ducati Bevel Square Case 75-76, middle Boge Monoschock from Ducati Belt 400-F 3, right Altenator Cover Ducati Round Case 750 GT build 1972, middle front Fork leg Ducati 750 F 1, Background left Crankshaft Ducati 750 Round Case GT-Yellow Sport, middle Front Cyl Head Ducati 750 Round Case with new valve seat and new inlet valve, right Clutch Cover Ducati 750 Round Case

New made for Ducati Bevel MHR-Mille S2 Crown Gear 0905 50 040, Sprocket on starter engine 0805 50 010, 5th August 2020

New made for Ducati Bevel Round and Square Case, 5th Gear on Mainshaft 6 high dog Copyright Herman Jolink 0755 16 040 (wide shift fork) 5th august 2020

New made for Ducati Bevel Square 1st Gear Z 34 on Layshaft 6 High Dog Copyright Herman Jolink 0755 16 210- 5th august 2020
19-20 dezember Central Classics Meidoornkade 24-3992 AE Houten Netherlands Saterday 10.00-17.00 Sunday 10.00-16.00 Hal 2-stand 244 A : with Ducati Bevel Parts and engines

Herman Jolink made Cylinder Foot Gaskets for Ducati Bevel 750 Round Case: 860-900 Square Case: MHR Mille-Mille S2
31 jan 1-2 feb 2020 Classic Motorshow Bremen Hal-1 C 141 Germany
8-9 feb 2020 Retro Wieze October Hallen Hal-1 stand W-227 Wieze Belgium

8-9 ffebruary 2020 Retro Beurs Wieze Belgium Ducati Bevel 950 NCR replica Race Bike left Ducati 750 Bevel Round Case 750 GT build 1972 left Hyperpro steer schock absorbers made in Netherlands midlle Putoline Oil Motor Cycle products made in Netherlands

8-9 february 2020 Retro Beurs Wieze Belgium Herman Jolink on the Ducati Bevel 950 NCR replica Race Bike

8-9 february 2020 Retro Beurs Wieze Belgium background Ducati Bevel 750 GT build 1972 Petrol Tank and Side Covers Red-Black one Cylinder Sleeve with nikasil kompleet for Racing for 92 mm Piston Putoline Oil products made in Netherlands

8-9 february 2020 Retro Beurs Wieze Belgium organisator Yves Demanet with the first four cylinder motor bike ever build A Belgium made Gillet at Herstal

5 february 2020 Herman Jolink at his Milling machine making parts for the Back light indicator from his Trailer

Retro Wieze Belgium 8-9 february 2020 midlle Yves van Buylaere rider on a Ducati Bevel 750 GT round case between Ducati Bevel Parts

13 january 2020 Herman at the Milling Machine made the right hight from the distance piece under Ignition House Ducati Bevel 750 Round Case

12 january 2020 Zevenhuizen Netherlands New Year Meeting Ducati Club Nederland Herman Jolink with his Old Lady ( Ducati Bevel Mille S 2 ) 281 km in rain and storm

Foto Luckau Germany 2009, Crew Chief Herni Evers set up the start Revs from the Ducati Drag Bike: Henri Evers Support the Dragracing Team Herman Jolink since 1984: Henri Past Away on 27th july 2018: Evers a real Evers Sutch a Evers is Doing his thing Yust he think that is the good way Henri want to do his thing Yumping over his own
Shadow Fighting whit him self Fighthing with instance Working more working Henri your work is done: copyright Herman Jolink

Saterday 23 november 2019 Neckarwestheim Germany Herman Jolink with his Old Lady (Ducati Bevel Mille S2) 545 km to ride to the Funeral from Peter Granica past away 21 november during a long ilnis, brain cancer, Peter Granica whas 48 years and did 16 year from it Dragracing with Home made Turbo Suzuki whitout wheelybar and with road tyre, Best on the 1/4 Mile (402 m) :7.550 sec with 306 kmh Sunday 24 november Herman Jolink ride back home with the Old Lady 536 km

Peter Granica Germany past away 21 november after a long Ilnis (brain cancer) Riding 16 years in the Super Street Bike Class with Home made Turbo Suzuki without wheelybar with street tire Best on the 1/4 Mile (402 m) 7.550 seconds with 306 kmh endspeed

23 november 2019 Neckarwestheim Germany After the Celbration from the Funeral from Peter Granica past away 21 november 2019 Brother Thomas Granica doing a Rolling Burn Out on the Super Street Bike from Peter, right a close friend from Peter,
Some words at the Funeral Celebration: I ame Herman Jolink riding in 2020 45th years Dragracing Are always a fread for the run But at the start it is away I don t now if Peter whas a fread to ride His best time on the 1/4 Mile (402 m) 7.550 seconds that is ferry good Peter whas not the lightest in the USA al the Super Street Bike riders are ferry light His best end speed whas 306 kmh also ferry fast Have haer that Peter whas building a new SSB Bike Thomas : you mnust buil d the SSB Bike ready Peter wil ride than with you For ever Peter will ride with you copyright Herman Jolink

1-3 february we where for the 4th time at the Classic Motorshow Bremen Germany photo left Max Ruprecht 8 years a big fan from Herman Jolink right his father Olaf Ruprecht right Ducati Bevel Square 75-77 Ducati ignition with new made manifilds 40 mm, bevel house cover 750 round design with Ducati on it Low valve covers Alumium and Magnesium and Sprocket cover for Bosch Square Ducati Bevel Messing Exhaust Nuts we can made oversize threat

1-3 february 2019 Classic Motorshow Bremen Germany Ducati Bevel Parts for Square and Round Case also Mille parts and Ducati 1 cylinder pistons also for V-Twins and we have allot contacts we do 45 years Ducati Bevel drive engines

1-3 feb 2019 Classic Motorshow Bremen Germany Ducati Bevel Parts Roud Case Square Case 75-77 and Mille
14-17 february Motorbeurs on the stand from Oliehandel.NL Hal 12-C32 Utrecht Netherlands

14-17 february 2019 we present for the 28th year at the Motorbeurs at Utrecht Netherlands on the photo with Hyperpro steer schock Absorbers made in the Netherlands

14-17 february 2019 Motorbeurs Utrecht Netherlands The Vink Family 2nd from left sohn from Henk Vink 3th from left the granddaughter from Henk Vink right daughter from Henk Vink 2nd from left daughter from Henk Vink in front the Ducati Panigale-1 Drag Bike the Team Jolink try to get it ready for 11-12 may 2019 Malmo Sweden (Henk Vink whas a fames Dragracer on Nitro Kawasaki it is allot years ago he past away)

14-17 february we present for the 28th year at the Motorbeurs Utrecht Netherlands in front Putoline high Quality Oil products made in the Netherlands, we can deliver al sizes of high Quality J-E psitons in 4 weeks

14-17 february 2019 we Exposure Ducati Bevel parts for Round Case and Square Case on our stand at the Motorbeurs at Utrecht Netherlands, we use long years the MJK saefty leather suite made in the Netherlands , also we use a Premier Helmeth and Style Martin Leather booths ,there where 85.000 vistors at the Motorbeurs 2019

24 february 2019 Herman Jolink made a Special Tool to put in the seal beheynd the front sprocket for the Ducati 1200 Bevel engine with the orginail Cylinders with longer Cylinder sleeves for the 90 stroke and 92 mm J-E pistons background Putoline Chain Spray DX 11 it stay on the chain also in heavy rain we test it with our Old Lady the Ducati Bevel Mille S 2

New made for Ducati Bevel Round Case and Square Case,in front small Shift Selector fork 1- 2-5 Gear, background wide Shift Selector Fork 3-4 Gear

1 March 2019 Herman Jolink with Ducati Mille S2, with Aluminium Imola Tank 900 SS seat and 900 SS fearing

3 March Ducati Bevel Parts, left new made shift selector fork 1-2-5 gear, above shift selector fork 3-4 gear for Ducati Bevel Round and Square Case, for 40 mm Carb Inlet Trumpet, For Clutch Cover Round and Square and 1 Cyl Ducati Messing Nuts M 22 x 1.5 , Messing Exhaust Nuts oversize for Ducati V-Twin and 1 Cylindere, Torque Cams for Square Case Cam Cover Round Case Design with 900 on it Magnesium. Cam Cover last Type Mille, New 1 Cyl Cam Cover 350, Long Oilfilter for Round and Square Case Return Spring gearclock for Square Bosch and Round Case Gearclock

3 march 2019 left Herman Jolink right Andreas Lux he have allot Bevel Ducati s but he don t ride them that is a pitty. The first ride this year from Herman Jolink on the Old Lady (Ducati Mille S 2) 150 km in the rain , But it whas so nice The Old Lady was talking to me Ride me ride Lissen to me I now the way in live Lissen to me i show you the right way Copyright Herman Jolink
16-17 march Technorama Kassel Germany

Will de Graaf right on the Photo, 35 years Will de Graaf whas working at the Motor Cycle Magazin Motor Moto 73 and Classic and Retro Magazine at the Editorial office 6 months befor here Retirement she whas discharge Past away thursday 14 march 2019 She whas 66 years. Will will will Forever will Where will whas There whas a way Will oh will Will whas the captain Will Will Will For you Will Herman Jolink
5 april 2019 working at the Ducati Panigale-1 Drag Bike

16 april 2019 Ducati Panigale -1 Drag Bike Herman Jolink on the Ducati Panigale-1 Drag Bike get the right position for the body and the foot pegs

The 15th Ducati Bevel Day at Star Twin Loenen Netherlands Herman Jolink with a 750 Round Case Crankshaft
20 april Ducati Bevel Day Star Twin Loenen Netherlands

2 may 2019 New magnesium backwheel for the Ducati Panigale-1 Drag Bike we made the rim wider to fit the 7 inch Mickey Thompson Drag Slick
Wednesday the 8th may we go to the 1st European Super Twin Top Gas Drag Race at Malmo Raceway Sweden, with a big Top Gas Field from 20 riders we wil start with the Ducati 1198 RS (1266) Drag Bike, 6 may monday and 7 may thuesday we wil work at the Ducati Panigale-1 Drag Bike try to get it ready for the 2nd Top Gas Drag Race 14-16 june Gardermoen Norway
11-2 may European Super Twin Top Gas and EDRS Malmo Sweden

1st European Super Twin Top Gas Drag Race Malmo Raceway Sweden 11-12 may 2019 Herman Jolink on the Ducati 1198 RS (1266) Drag Bike. Qualified 7th on the 1/8 Mile (201 m) with 4.117 sec with 202.8 kmh from 18 competitors in the Top Gas

11-12 May 2019 Malmo Race Way Sweden Sunday after the second round pulling back to the pits Herman Jolink get a big aplaus from the Top Gas Teams 1st round Jolink 5.431-201 kmh defete Schleichert De on 1340 H-D V-Rod Destroyer 6.322-175 kmh reaction Schleichert 0.152 Jolink 0.154 sec Then the 2nd round Menzi CH 2622 V-Twin special USA 4.556-239 kmh defete Jolink 5.450-201.7 kmh reaction Menzi 0.028 Jolink 0.119 sec European Super Twin Top Championship 1st Lymant Germany 940 points 2nd Albers Germany 720 3th Menzi Switserland 650 5th Jolink Netherlands 500 14th Heer Germany 310 then some riders with 300 points and some with 200 points 22 riders in Top Gas in 2019
24-24 may Ducati Club Race Assen Netherlands
14-16 june Top Gas and Norwegian Bike Festival Gardermoen Norway

14-15 june 2019 Gardermoen Norway 2nd European Super Twin Top Gas Round 1st round Herman Jolink 8.508 sec with 240 kmh defete Jaakko Miettinen Fin 9.594 sec 220 kmh reaktion Jolink 0.099 sec Miettinen 0.128 sec The oldest rider in the Top Gas against the youngest rider Herman 64 and Jaakko 17 years a nice race and new pers best for Jaakko. Jolink get the 3th place form 18 riders 4th round Schack DK 7.479-274 kmh defete Jolink 8.495 -243 kmh reaction Jolink 0.055 sec Schack 0.116sec Top Gas Championship after 2 rounds 1st Lymant De 1725 points 2nd Schack DK 1235 points 3th Jolink NL 990 points 24th Godske DK 110 points copyright Herman Jolink

Sunday 13 october 2019 Ducati Club Netherlands meeting Piramide van Austerlitz, Herman Jolink beheynd his Old Lady (Ducati Bevel Mille S 2)

Ducati Bevel Mille Crankcase left above frame bolt hole welded, right frame bolt hole welded with holes and alu brons bushes to fit kickstarter spindle

19 october 2019 Herman Jolink put out with a home made spezial tool the lower bevel gear bearing bush from a Ducati Bevel 750 Round Case Crankcase

23 october 2019 Messing Plug M 22 x 1.5 AGIP F1 OLIO in Clutch Cover for Ducati Bevel 750 Round Case and Square Case, Cylnder Studbolt from good flexibel material Threath forced for Round Case Lenght 190 mm for Square Case Lenght 185 mm Bigendpin 36-36 for first type Square Case and 750 Round Case

5 november 2019 working at the Ducati Panigale-1 Drag Bike at Loenen Netherlands together with Kees van der Starre from Star Twin Techniek

5 november 2019 Hogeweide Netherlands Herman Jolink made a spezial tool to fit a bearing in the Clutch Cover from a Ducati Bevel Sqaure and Round Case

14 november 2019 Ducati Bevel Parts Round Case and Square Case front Mainshaft for Roudn and Square Case in a short time we have new made in stock left Originail Oil Pump house spindled out with new oversize oli gears the drive spindle is one pace with the oilgear Right Round Case Crankcase wetblasted nicer then from the Factory Lower bevel gears new bearings also in the crankcase new bearings and seals Cam Covers design round case with 900 on it

14 november 2019 Herman Jolink at the Lay Machine made a Spacer between the Special Screw in the backside from a Ducati Bevel Bosch left Crankcase,fore the fixing stift to secure the shift drum in each gear

14 november 2019 Herman Jolink with his Old Lady (Ducati Mille S 2 Bevel ) she has don now 240.000 km, on the seat an Ducati Bevel Crankcase, Cylinder Head, Cylinders and the valve covers wetblasted nicer the new 14-15 dezember 2019 Central Classic with allot Ducati Bevel Parts and a Big Banner from Herman Jolink in action on the Ducati 1198 RS Drag Bike Houten Meidoornkade Netherlands

18 november 2019 Hogeweide New originail Gearbox Ducati Bevel Mille, front mainshaft with new made geart shift fork 3-4 gear, background Layshaft with new made gear shift fork 1-2-5 gear

28 november 2019 Herman Jolink at the Lay machine , modified Lower Midlle Gear from Ducati Bevel 750 Round Case

4 dezember 2919 9 Rockers Ducati Bevel V-Twin and 1 Cylinder to machining the right radius and new hard chroming 2 gear shift fork 1-2-5 gear 1 gear shift fork 3-4 gear new made 3 indicator light cap Ducati Bevel 860 GT 1e type

4 dezember 2019 Ducati Bevel Round Case 750 GT-Yellow Sport front Brake Caliper with 2 time Ducati on it ferry rear

Central Classics Houten Netherlands 14-15 dez 2019 lfet Herman Jolink in 2020 Dragracing 45 years on Ducati midlle Henny Kroeze World Championmship Speedway and Wall of Death right Speedway rider mane i don t now

14-15 dez 2019 Central Classics Houten NL left Jan de Rooij organiasator Motorbeurs and comment Road Race right Herman Jolink Ducati Bevel and almost 45 years Dragracing on Ducati

22 dezember 2019 Ducati Bevel 900 SS Square Case Bosch build 1979 with new made kickstarter by Herman Jolink