Ducati Bevel Parts 2021

Photo copyright Team Jolink: For Sale Ducati Bevel Mille S 2, with Dutch Papers, Good Condition and less kilometers, with originail Silentium Silensers and Fairing around Crankcase, One Of 171 There Made By Ducati In Bologna Italy
Photo Copyright Herman Jolink: 8th july 2021 : New made Clutch Cover Ducati Bevel 1st Type Square Case with Ducati Ignition, with Inspection Cover and Bronze plug M 22 x 1.5 and AGIP FI OIL
Photo Copyright Herman Jolink: 8th july 2021: New made Clutch Cover Ducati Square 1st Type with Ducati Ignition inside, fit perfekt on the Crankcase, bearing turn free when the Clutch Cover is tight witht the m6 x 1 imbus srews on the Crankcase
Photo Copyright Herman Jolink: 8th july 2021:Left New Made AGIP F1 OLIO Bronze Plug M 22 x 1.5 for Round and Square Case Clutch Cover and 1 Cylinder Ducati Clutch Cover. Right New Made Inspection Cover on Clutch Cover for Bevel Square Ducati
Photo Copyright Herman Jolink: 8th july 2021: NOS Inside Bosch Clutch Cover 2nd Type Ducati Bevel Square Case
Photo copyright Herman Jolink: 8th july 2021: NOS Bosch Clutch Cover 2nd Type Ducati Bevel Square Case
Photo copyright Herman Jolink: 8th july 2021: Used Complete Front Wheel Ducati Bevel Round Case 750 GT- and Yellow Sport 19 Inch Borrani Rim Good Condition
Photo copyright Herman Jolink: 8th july 2021: Borrani Rim WM -2/185 -19/40 Record 711 RM – 01 -4633 Made in Italy Good Condition for Ducati Bevel 750 GT and Yellow Sport Round Case
Photo copyright Herman Jolink: 8th july 2021: Ducati Bevel Originail Mille Bevel Ducati Crankshaft, with new oil bearings, Balanced on the originail 88 mm Borgo pistons weight 470 gram
Photo copyright Herman Jolink: 8th july 2021: NOS Altenator Cover Bevel Ducati MHR Mille-Mille S2 and 900 S2 and last type MHR 900
Photo copyright Herman Jolink: 28th june 2021: selfie Ducati Bevel 750 Round Case Crankcase with home made Special tool for Kickstart lever shaft. Whe can deliver New Made for 750 Round Case Altenator Covers and Gear Selector Coversincluded back side cover probely in october
Photo copyright Herman Jolink: 8th july 2021: NOS Outside Clutch Cover Bevel Ducati MHR Mille-Mille S2 and 900 S2 and last type MHR 900
Photo copyright Herman Jolink: 8th july 2021: Ducati Bevel Mille NOS 88 Borgo Pistons part nr 0905 47 400
Photo copyright Herman Jolink:8th july 2021 : NOS Ducati Bevel Mille Front and Back Cylinder
Photo copyright Herman Jolink: 9th july 2021: NOS Back Side Gear Selector Cover 750 Round and 1st Type Square Case Ducati Bevel
Photo copyright Herman Jolink: 9th july 2021: Timing Gears in Gear PLate Ducati Bevel Square Case
Photo copyright Herman Jolink: 9th july 2021: Home Made Stanley Steel Bevel Tubes for Ducati Bevel Square Case 31 x 127
Photo copyright Herman Jolink: 9th july 2021: Inside Clutch Cover Ducati Bevel MHR Mille-Mille S2 and 900 S2 and last type MHR 900
Photo copyright Herman Jolink: 9th july 2021: NOS Sprocket Cover Ducati Bevel MHR Mille-Mille S2 and 900 S2 and Last Type MHR 900
Photo copyright Herman Jolink: 9th july 2021: NOS Ducati Bevel MHR Mille -Mille S2 Primary Gears, Clutch Drum, Clutch Plates Friction and Steel, Clutch Pressure Plate
Photo copyright Team Jolink 9 july 2021: september -october-november 1990 Road Turkoglu _Narli East of Adana Turkey Herman Jolink and Mettje Spek (past away 4th june 2000) in 5 and a 1/2 week we did with the Old Lady (Ducati Bevel Mille S 2) 11.000 km and past the first 100.000 km
Photo 9th july 2021: NOS Complete Gearbox Main and Lay Shaft for Ducati Bevel MHR Mille-Mille S2 and 900 S2 last type MHR 900
Photo copyright Herman Jolink 9th july 2021: NOS Oil Pump0905 70 203 and Pumpgear 0905 70 230- Z 38 Ducati Bevel MHR Mille and Mille S 2 and 900 MHR and 900 S 2 with dry clutch
Photo copyright Herman Jolink 9th july 2021: Ducati Bevel Last Type MHR Mille and Mille S 2 New Made Cam Cover Design as Round Case with Ducati on it 0905 92 640 , Can also used on Square Case and Round Case, we can also Deliver cam covers from Magenesium with 900 on it
Photo copyright Herman Jolink 9th july 2021: For Ducati Bevel Square Case Rectifier 0759 46 750 12 Volt 24 Amp,750 SS 900 SS Darmah 860 GTS

Photo copyright Herman Jolink: 9th july 2021: Left Ducati Bevel 1 Cylinder Head Home made inlet manifold Inlet Channel Welded to make the channel higher Combustion Chamber welded New Designd Combustion Chamber to ouer view, Changed the Valve Angle inlet valve 42.5 mm exhaust valve 38 mm Spark Plug in a bether position. Ducati Bevel Rockers getting of the old chromed Machining the right Radius New Hardchromed, Ducati Bevel 750 Round Case Rockers Adyustment , 860 GT-GTS Adyustment screw, 1 Cylinder Adyustment and Adyustment screw New Made Closing Rockers for V-Twin Desmo, Open Rockers Left and Right for 4 Valve Belt Ducati s , Left front new made 5th Gear Z 22 on Layshaft for 1st type Sqaure with 6 High Dogs
Photo copyright Herman jolink: 9th july 2021: Allot Diverend Sizes Viton O Ring for Ducati Bevel and new Type 2 Valve Belt and 4 Valve
Photo copyright Herman Jolink: 9th july 2021: Allot Diverend Sizes Viton O Ring Ducati Bevel and V-Twin and 1 Cylinder
Photo copyright Herman Jolink: 9th july 2021: Ducati Bevel Gaskets
Photo copyright Herman Jolink: 9th july 2021: Ducati Bevel Allot Diverend Sizes Viton Junk Rings
Photo copyright Herman Jolink: 9th july 2021: Left above Ducati Bevel Cam Covers Magnesium Design Round Case with 900 on it, Low Valve Covers for 750 Round Case Aluminium and Magnesium, Upper and Lower Bevel Gear Square Case, V-Twin Rockers Valve Spring with Adyustment screw Rockers Pins with Alu Bronze Bush
Photo copyright Herman Jolink:9th july 2021: High Valve Cover Ducati Bevel, Front Brake Caliper (ex Honda 125 RS Upside down front fork) V-Twin Valve Spring Rockers Adyustment crew, Pantah open and Close Rockers New Hardchromed and Rocker Pins
Photo copyright Herman Jolink: 9th july 2021: Ducati Bevel Clips allot Diverend Sizes , Pantah Open and Closing Rockers
Photo copyright Herman Jolink: 9th july 2021: Ducati Bevel Allot Inlet Valves 40-42-43-47 and Exhaust Valves 36-38-37, for 750 Round Case valve spring inlet 40 and exhaust 36, diverend sizes Alu-Bronze Valve Leaders
Photo copyright Herman Jolink 9th july 2021: Ducati Bevel 1 Cylinder Race New Made Cylinder 92 bore with Nikasil one piece ferry Stabil, Forged Piston 92 pin 20 weight 440 gram, Connecting Rod Bigend 42.8 Small end 20 Middle -Middle 141.4 Wide Bigend 20 wide Small end 20 wide middle 11.4
Photo copyright Herman jolink: 9th july 2021: Ducati Bevel Parts, left front Camshaft Secure Plate, Camshaft Nut M 14 x 1 left Threat, L Crankshaft Nut M 24 x 1.5, Clutch House Nut M 20 x 1 also R Crankshaft, Fuel Tube Clamp, Clutch Push Rods, Inlet Manifold Rubber 32 and 40 Dell Orto , , Deverend Sizes Valves, Cross and Bush Revs Driving L Cyl Head , Rubber in Right Crankcase to Long Oilfilter, Bosch Gearshift Return Spring, Spring on Gear Shift Lever Bosch, Valve Seals Aluminium Gasket Long Olifilter Oil Dip Stick, Viton Bevl Tube O Ring, Exhaust Gasket
Photo copyright Herman Jolink: 9th july 2021: Allot Diverend Sizes Shims, Plastik Nut for end af Handle bar, front sprocket secure nut, 750 Round Case Ignition Shaft Secure Nut
Photo copyright Herman Jolink: 9th july 2021: For Ducati Bevel V-Twin and 1 Cylinder: All Bearings, also originail Main Bearings for Bevel V-Twin
Photo copyright Herman Jolink: 7th july 2021: Ducati Bevel 750 GT- Yellow Sport Round Case Ed 1973, Front Fork Marzocchi in Good Condition, with new Junk Ring and Dust Cap
Photo copyright Herman Jolink: 9th july 2021: Ducati Bevel 750 Round Case, Crank Case Wetblasted Nicer then New, New Bearings, New Junk Ring, Polishd Flangias,with the Lower Bevel Gears 0775 29 800 Z 24-36-36 in Good Condition
Photo copyright Herman Jolink: 9th july 2021: Ducati Bevel 1st Square with Ducati Ignition Clutch Cover for Start Engine
Photo copyright Team Jolink: aug 1976: Ducati Bevel Round Case 750 Super Sport Green Frame , Drag Race Drachten Netherlands 1/4 Mile (402 m) 13.325 seconds, left on the back Herman Jolink right his Brother Bennie
Photo copyright Herman Jolink: 9th july 2021: Ducati Bevel Crank Case Wetblasted Bosch Ignition
Photo copyright Herman Jolink: 9th july 2021: Ducati Bevel 1st Type Square with Ducati Ignition, Crankcase Cylinders Cyl Heads Wetblsted, Front and Back Cyl Head Inlet Channel Welde up to take the Inlet Channel Higher Channels Ported a Little Bigger Valves, Two Spark Heads New Made Clutch Cover, New Made Inlet Manifolds, New Made Bronze Exhaust Rings
Photo copyright Herman Jolink: 9th 2021: Ducati Bevel Crank Case Mille Wetblasted with Alu Bronze Bushes to fit Kickstart Lever Shaft
Photo copyright Herman Jolink: 9th july 2021: Ducati Bevel 750 Round Case GT-Yellow Sport- Super Sport Green Frame , Forged 80.5 Piston pin 22 weight 415 Gram
Photo copyright Herman Jolink: 9th july 2021: Ducati Bevel Parts left Ring Nut M 55 x 1.5 Mille Clutch Housing 0805 16 180, Right Alu Air Inlet Horn for 400 PHM Dell Orto with on both side Threat, Inspection Cover on Clutch Cover Square Case, New made Bronze Plug M 22 X 1.5 in Clutch Cover Round and Square Case and 1 Cylinder Clutch Cover, Right New Made Gear Shift Fork 1-2-5 and 304, New Made Bronze Exhaust Ring Diverend Sizes: M 51.2 x 1.5- M 51.4 x 1.5-M 51.7 x 1.5-M 51.8 x 1.5-M 52.0 x 1.5 Whe make every size you need, Gear Shift Sector Gear Mille Lenght 111 part nr 0805 13 150, Gear Shift Sector Gear 900 SS Bosch Lenght 111
Photo copyright Herman Jolink: 9th july 2021: Right New Made %th Gear Z 22 Ducati Bevel Sqaure first Type with 6 High Dogs, Left 1st Type Square Ducati Plug in L Crankcase for Ducati Ignition Cable 0755 49 013
Photo copyright Herman Jolink: 9th july 2021: New Originail Ducati Pantah Valves, For Ducati Bevel Used Wheelcarrier (Chain Tensioner) 0795 40 050 and 0795 40 040 Left 5th Gear Z22 Ducati 750 Round Case and first Type Square Case with 6 Dogs
Photo copyright Herman Jolink: 9th july 2021: For Ducati Bevel MHR Mille and Mille S 2, New Made Pump Gear on Oil Pump Z 38 part nr 0905 70 230
Ducati Bevel Square Case and MHR Mille and Mille S 2als with Adyust the Camshaft Gear on a 750 Round Case Desmo, Good Condition, New Oil Plug 0755 49 950
Photo copyright Herman Jolink: 9th july 2021: Ducati Bevel 750 Round Case Yellow Sport Super Sport Green Frame, For Kickstart Lever Special Bolt M 12 x 1.5 part nr 0755 07 320
Photo copyright Herman Jolink: 9th july 2021: Ducati Bevel 750 Round Case Yellow Sport and Super Sport Green Frame, and 1st Type Sqaure 7500 SS – 900 SS Foot Peg with UNF Threat, Threebound Liqued Gasket, for Ducati 1 Cylinder Petrol Tank, Petrol Cock Threat 10 x 1
Photo copyright Herman Jolink: 9th july 2021 : Left Ducati Bevel 1 Cylinder Desmo originail Closing and Open Rockers new Hardchromed, Right 1 Cylinder valve spring Rocker with Adyust screw
Photo copyright Herman Jolink: 10th july 2021: Ducati Bevel 1 Cylinder Valve Spring Rockers adyustment, machining the right Radius and new Hardchromed
Photo copyright Herman Jolink: 10th july 2021: Ducati Pantah Open and Close Rockers new Hardchromed
Photo copyright Herman Jolink: 10th july 2021: Ducati Bevel V-Twin 860 GT-GTS Square Valve Spring Rockers Adyustment Screw
Photo copyright Herman Jolink: 10th july 2021: Ducati Bevel V-Twin Left originail Desmo Closing Rockers machined the right Radius and new Hardchromed, Right New Made Desmo Closing Rockers 24 Hours Hardned in Oven and Hard Chromed
Photo copyright Herman Jolink:10th july 2021:Ducati Bevel V-Twin Dessmo originail Open Rockers Machined the Right Radius and new Hardchromed. In a short time we wil have New Made Desmo Open Rockers for Ducati Bevel V-Twin
Photo copyright Herman Jolink: 10th july 2021: Ducati Bevel V-Twin MHR Mille and Mille S2 New Made Forged Pistons 88 mm weight 440 gram
Photo copyright Herman Jolink: 9th july 2021: Selfie we did today 126 km with my Old Lady (Ducati Bevel Mille S2) now we ride more than 240.000 km with the Old Lady, we get some food and did some Post and Adyust the 40 PHM Dell Orto Carbs
Photo copyright Herman Jolink: 10 july 2021: Ducati 4 Valve Open and Close Rockers Left and Right, Machined the right Radius and New Hardchromed
Photo copyright Herman Jolink: 10th july 2021: Ducati Bevel V-Twin New Made Gear Selector Shift Forks for 1-2-5 Gear and 3-4 Gear, 24 Hour Hardned in Oven
Photo copyright Herman Jolink: 10th july 2021: Ducati Bevel 1 Cylinder Race Valve Spring Camshaft, For Ducati Bevel V-Twin Front and Back 860 GT and GTS valve spring camshaft
Photo copyright Herman Jolink: 10th july 2021:Ducati Bevel V-Twin Square Case NOS Upper Bevel Gear Z 21-28 part nr 0759 29 600 Petrol Tank Fix Elastic Brake Rod 750 SS and 900 SS part nr 0797 41 219
Photo copyright Herman Jolink: 10th july 2021: Left Ducati Bevel V-Twin Round and Square Case Crankcase middle Bush 13 x 10.5 x 23 part nr 0755 49 255 Crankcase outside Left and Right Bush 10 x 7 x 13 part nr 0400 49 240 Home made, 1st Type Square and Round Case Right Shift Gearclock Spindle part 0608 13 200, Shift Distance piece 0755 13 045
Photo copyright Herman Jolink: 10th july 2021: Ducati Bevel V-Twin Round 750 GT and Yellow Sport and 860 GT and GTS , Brake Lever 0795 80 570, Brake Cam 0795 80 560, Brake Shoe Spring 0795 80 590
Photo copyright Herman Jolink: 10th july 2021: Ducati Bevel V-Twin Round and Square Case Rubber Gear Shift Lever and Brake Lever 0900 07 320, Flangia 1 Cyl 250
Photo copyright Herman Jolink: 10th july 2021: Ducati Bevel 1 Cylinder Bronze Exhaust Ring: M 48.5 x 1.5, M 48.8 x 1.5 We make Every Size you Need
Photo copyright Herman Jolink:10th july 2021: Ducati Bevel Square Case Godd Used Upper Bevel Gear Z 21- 28 0759 29 600 and one Lower Bevel Gear
Photo copyright Herman Jolink: 10th july 2021: Ducati Bevel V-Twin Petrol Tank Buffer 0797 83 030, Ringnut 0400 46 020 and Plug 0400 45 040 and Rubber 0400 45 030 ( for Igniton Cable and Altenator Cable
Photo copyright Herman Jolink: 10 july 2021: Ducati Bevel V-Twin front Long Oil Filter Square Case and 2nd Type Round Case, Used Torqua Camshaft for Square and with adyust the Camshaft gear also on Round Case Desmo, Threebound Liqued Gasket The Best From The Ducati Factory, Grey Plastik Cover in Central Pipe 0177 40 020, Mille Oilpump Pump Gear Z 38 new made, Foot Peg UNF Threat for 750 Yellow Sport and 750 Super Sport Green Frame, and first Type 900 SS and 1 Cylinder 350 Silver Desmo Shot Gun, Exhaust Ring Bronze whe make evry size you need, 5th Gear Z 22 6 Dogs Round and first Type Square Case
Photo copyright Herman Jolink: 10 july 2021: Ducati Bevel V-Twin Round Case, New Painted Petrol Tank and Side Covers Red Black
Photo copyright Herman Jolink: 10th july 2021: Ducati Bevel V-Twin Round Case New Painted Steel Petrol Tank Red Black
Photo copyright Herman Jolink: 10th july 2021: Ducati Bevel V-Twin Round Case 750 GT Side Covers New Painted Red Black
Photo copyright Herman Jolink: 11th july 2021: New Made Crown Gear Z 10-30 Ducati Bevel MHR Mille and Mille S 2 part nr : 0905 50 040 Sprocket Z 12 on Starter Motor : 0905 50 010 Chain Total Lenght 46 part nr: 0805 50 200
Photo copyright Herman Jolink: 11th july 2021: Ducati Bevel Round and Square Case , New Made Mainshaft Z 1 = 19 and Z 2 = 24, part nr 0755 16 010
Photo copyright Herman Jolink: 11th july 2021: Ducati Bevel Altenator 12 V 400 W part nr 0759 49 400 for MHR Mille and Mille S 2 and 860 GTS- Darmah- 900 SS- 900 S 2- MHR 900
Photo copyright Herman Jolink: 11th july 2021: For Ducati Bevel Crankshaft 750 Round Case GT and Yellow Sport New Bigend Pin Oversize Rollers, Balanced on Forged Piston 80.5 pin 22 weight 415 gram
Photo copyright Team Jolink: aug 1997 : Gross Dolln Germany Test and Tune 1200 Blower Ducati Bevel on High Oktane Petrol, 1/4 Mile (402 m) 9.832 sec with 213 kmh In 1998 we did with a little more Blower Pressure, on the 1/4 Mile (402 m) 9.453 sec with 219 kmh Best 60 Foot 0-100 kmh 1.283 sec Vasteras Sweden, rider Herman Jolink
Photo copyright Herman Jolink: 11 july 2021 : Ducati Bevel Round Case 750 GT Kickstarter Lever NOS part nr 0755 07 306
Photo copyright Herman Jolink: 11th july 2021 : Tre-Inner Conical Gears Z 24-36-36 part nr 0755 29 800 Good Condition Ducati Round Case 750 GT – Yellow Sport – Super Sport Green Frame
Photo copyright Herman Jolink: 11th july 2021: Ducati Bevel Round Case Middle Bevel Gear (under Ignition House ) Z23 Z 23 part nr 0755 29 700
Photo copyright Herman Jolink: 11th july 2021 : Ducati Bevel Round Case 750 GT-S-SS Tie Rod Lenght 190 mm part nr 0755 49 270 Good Condition
Photo copyright Herman Jolink: 11th july 2021: Kick Lever 750 GT Round Case Originail Polishd and New Chromed part nr 0755 07 303
Photo copyright Herman Jolink: 11th 2021 : New Made Half Handle Bars Lenght 270 mm for Ducati Bevel Round Case Yellow Sport and Super Sport Green Frame part nr 0796 54 920
Photo copyright Herman Jolink:11th 2021 : 1st Type 750 Ducati Round Case Kick Spindle Lenght 300 part nr 0755 07 110 Good Condition
Photo copyright Herman Jolink: 11th july 2021: Ducati Bevel Round Case 750 GT – Yellow Sport- Super Sport Green Frame, Upper Bevel Gears Z 21-28 part nr 0755 29 600 Good Condition
Photo copyright Herman Jolink: 11th 2021 : New Made Tie Rod Lenght 190 mm part nr 0755 49 270 for Ducati Bevel 750 Round Case
Photo copyright Herman Jolink: 11th 2021 : New Made 1st Gear Z 34 one Layshaft 6 High Dogs Ducati Bevel Round and First Type Square Case part nr 0755 16 210
Photo copyright Herman Jolink : 11th 2021 : Forged Piston 86.4 mm pin 20 weight 480 gram for Ducati Bevel 860 GT-GTS and 900 SS and Darmah and MHR 900 and 900 S 2
Photo copyright Herman Jolink: 11th july 2021 : Ducati Bevel Round Case Oil Pump Gear Z 48 part nr 0755 70 230
Photo copyright Herman Jolink: 11th july 2021 : Holder Contagiri- Contachilometri Ducati Bevel Round Case 750 Yellow Sport part nr 0796 37 053
Photo copyright Herman Jolink: 11th july 2021 : Ducati Bevel Square Case Forged Piston 87.0 m pin 20 weight 480 gram for Ducati 860 GT-GTS and Darmah and 900 SS , MHR 900 and 900 S 2
Photo copyright Herman Jolink 12 july 2021: Ducati 1 Cylinder 350 Forged piston 76.0 mm pin 18 mm weight 378 gram part nr 0610 47 400
Photo copyright Herman Jolink 12 july 2021: For Ducati Bevel 1 Cylinder Forged Piston 74.4 mm pin 18 mm weight 337 gram, Whe Can Deliver Every Size Forged Piston You need , Give us a Example Piston , say to us withs Size wat weight we take care of it, You must take four Pistons, Delivery Time 4 weeks
Photo copyright Herman Jolink 12 july 2021: Ducati Bevel Square Case Bosch,New Made Ruf Clutch Cover must be make ready to fit
Photo copyright Herman Jolink 12 july: Ducati Bevel New made, a Replica from a Originail NCR Factory Race Bike Dry Clutch Cover wil fit on a 750 Round Case GT, Yellow Sport, Super Sport Green Frame , 750 SS- 900 SS Square 1st type, 900 SS Square Bosch, Darmah 860 GT- GTS
Photo copyright Herman Jolink 12 july 2021: Ducati Bevel MHR Mille and Mille S 2 , Complete New Made Crankshaft Whit Carrillo Connecting Rods, Balanced on 88 mm pin 20 Piston weight 440 gram
Photo copyright Herman Jolink 12 july 2021: Ducati Bevel Round Case 2nd Type, Long Oil Filter Lenght 158 and lenght 17.2 round 11.8 , part nr 9755 49 800, fit in Rubber in Right Crankcae 0755 49 275
Photo copyright Herman Jolink 12 july 2021: Ducati Bevel Square Long Oil Filter Lenght 158 end lenght 13.2 and 11.8 round part nr 0759 49 800
Photo copyright Herman Jolink 12 july 2021: Ducati Bevel Square Case , Oil Cartridge part nr 0759 49 890
Photo copyright Herman Jolink 12 july 2021: Ducati Bevel Square Case Originail Bevel Tubes 31 x 127 new Chromed part nr 0755 29 090
Photo copyright Herman Jolink 12 july 2021: Ducati Bevel Round Case 750 GT Yellow Sport Super Sport Green Frame, originail Bevel Tube 31 x 145 new Chromed, part nr 0755 29 090
Photo copyright Herman Jolink 13 july 2021: Ducati Bevel Round Case 750 GT Yellow Sport Supper Sport Green Frame and 1st Type Square Case New Made 4th Sleeve Gear Z 30 6 High Dogs on Mainshaft part nr 0755 16 300
Photo copyright Herman Jolink 16 july 2021: Ducati Bevel V-Twin Originail Valve Cover Gasket part nr 0755 29 295, new nr 788 10 32 1 A




Photo copyright Herman Jolink 16 july 2021: Ducati Bevel MHR Mille and S 2, MHR 900 and 900 S 2, Oildrain Plug M 22 x 1.5 new nr 780 20 47 1 A, Alu gasket 22 x 28 x 1 part nr 0660 49 053, Oil Cartridge M 16 x 1.5 part nr 0905 49 960 new number 444 4 003 5 A
Photo copyright Herman Jolink 16 july 2021: Ducati Bevel 750 Round Case GT Yelleow Sport Super Sport Green Frame Flangia 0755 29 061, we can poloshing them for you, Originail Bevel Tube New Chromed part nr 0755 29 090 Left Viton O ring around the Bevel Tube 0400 29 083 : 31 x 3.4 and if you like right Over Size Viton O Ring 30 x 3.8
Photo copyright Herman Jolink 16 july 2021: Ducati Bevel 1st Type Square Case for 860 GTS and 900 SS with Ducati Ignition New Made Clutch Cover part nr 0759 49 550 Complete with new Bearing 20 x 47 x 14 / C3, New Clip 47 I, Home made Washer beheynd the Bearing part nr 0755 49 660 New Made Bronze Plug M 22 x 1.5 with AGIP F 1 Olio part nr 0400 49 090 Clutch Inspection Cover 0759 49 020, Not Made In China
Photo copyright Herman Jolink 17 july 2021: Ducati Bevel Round en Square Case Mille V-Twin and 1 Cylinder New Made Ruf Bronze Exhaust Ring Nut, We can make Over size Treath every Size you Need
Photo copyright Herman Jolink 17 july 2021: Ducati Bevel 1 Cylinder wide and Narrow Case We Have New Made Ruf Bronze Exhaust Ring Nuts, we make every size you need, ask us we make it for you
Photo copyright Herman Jolink 17 july 2021: For Ducati Bevel Round Case 750 and Square Case and Mille New Made Bevel House Cover part nr 0755 92 270 Polishd by Herman Jolink, Not Made In China
Photo copyright Herman Jolink 17 july 2021: Terminals for you Gear Shift Pedal and Brake Pedal Left M 6 x 1 Left Threat, M 8 x 1.25, M 6 x 1 Inside Threat S 16 E, M 6 x 1 SAKAC 6 M, Right M 6 SAAC 6 M, 2nd from Right M 6 inside Threat 616 E Not Made In China
Photo copyright Herman Jolink 17 july 2021: Forged Pistons 92 mm pin 20 mm with Un Machined Top
Photo copyright Herman Jolink 17 july 2021: Used Ducati 750 GT Round Case Pistons 800 pin 22 weight 493 gram
Photo copyright Herman Jolink 17 july 2021: Used Ducati Bevel Round Case Pistons 80.6 pin 22 weight 435 gram For Ducati 750 Yellow Sport and 750 Super Sport Green Frame
Photo copyright Herman Jolink 17 july 2021: NOS Ducati Bevel 1 Cylinder Mark 3 Cam Cover with Ducati 350 cc on it part nr 0660 92 640
Photo copyright Herman Jolink 17 july 2021: For Ducati Bevel Square Case New Made Aluminium Oil Filter Cover 0759 49 860
Photo copyright Herman Jolink 17 july 2021: For Ducati Bevel 1 Cylinder 250 Mach 1 Narrow Case with 5 gears, In a Short Time we wil have a Kickstarter Lever part nr 0603 07 300
Photo copyright Herman Jolink 17 july 2021: Terminal M 10 x 1.5 x 17 SA 10 C, not Made In China
Photo copyright Herman Jolink 17 july 2021: Ducati Bevel 750 Round Case 1st type Kick Shaft Lenght 300 Left and Right Hardchromed
Photo copyright Herman Jolink 17 july 2021: Ducati 999 RS Forged Pistons 104 mm pin 20 mm weight 433 gram , Compression Ratio 13.2
Photo copyright Herman Jolink 17 july 2021: Ducati Bevel Square Case Bosch and MHR Mille -S 2 MHR 900 and 900 S2 and Darmah Spring on Shift Drum 0799 13 120, Peg Fixing Shift Drum 0799 13 135 In Special Crew M 20 x 1.5 x 20 , Distance Piece 20.2 x 26 x 5.5 part nr 0799 13 110, Return Spring 0799 13 110, Sector Gear 900 SS Bosch Lenght 134 part nr 0799 13 150, Sector Gear MHR Mille-S 2 and 900 MHR and 900 S 2 dry clutch Lenght 111 part nr 0805 13 150
Photo copyright Herman Jolink sep 1987 : With the Old Lady (Ducati Bevel Mille S2) for the Rock from Gibraltar Great Britain Herman Jolink and Mettje Spek (past away 4th june 2000)
Photo copyright Herman Jolink 13 july 2021: For Ducati Bevel 750 SS Green Frame Round Case, 750 SS and 900 SS Square Case with 40 PHM Dell Orto Carbs , Home Made Air Inlet Horn with on both side Threat Identical as the Originail Grey Plastik Air Inlet Horn
Photo copyright Herman Jolink 14 july 2021: Ducati Bevel MHR Mille -S 2 and MHR 900 and S900 S 2, Al Screws to tight the Fairing and Side Covers and the wind schield
Photo copyright Herman Jolink 14 july 2021: Ducati Pantah 500 and 600 V-Wire part nr 0801 37 060 Rev Counter Cable Nippon Denso
Photo copyright Herman Jolink 14 july 2021: Ducati Pantah 500-600 part nr 0660 54 954 Throttle Long Wire
Photo copyright Herman Jolink 16 july 2021: Ducati Bevel 750 Round Case Originail Ignition Cover part nr 0755 46 900, we made like new Rust of Polishing new chromed, We can do it for you

Photo copyright Herman Jolink 16 july 2021: Ducati Bevel Bevel tube originail we removed the rust , Polishing and new Chromed part nr 0755 29 090, We can do it for you, Voton O Ring for the Bvel Tube 31 x 3.5 part nr 0400 29 083, New made Cam Nut Secure Plate fit perfekt part nr 0400 29 040 Secure Plate Middle Gear part nr 0755 29 220, Ring Nut Middle Gear 0755 29 210
Photo copyright Herman Jolink 19 july 2021: Ducati Bevel1st Type 860 GTS and Darmah SD and 750 SS-900 SS with Ducati Ignition New Made 5th Gear Z 22 on Layshaft with 6 High Dogs not made in China
Photo copyright Herman Jolink 19 july 2021: Ducati Bevel 750 SS and 900 SS and Darmah SD Headlight Steel Cap part nr 0797 38 200
Photo copyright Herman Jolink 19 july 2021: Ducati Bevel 1st Type Square Case with Ducati Ignition 860 GTS and 750 SS-900 SS and 1st type Darmah 3th Gear Z 26 on Layshaft Used Good Condition part nr 0755 16 070
Photo copyright Herman Jolink 19 july 2021: Ducati Bevel part nr 0755 13 070 Fork Shift Pin 12 x 158 mm 750 Round Case and First Type Square Case
Photo copyright Herman Jolink 19 july 2021 ; Ducati Bevel Round Case and 1st Type Square 3th Gear Z 27 On Mainshaft used Good Condition part nr 0755 16 030
Photo copyright Herman Jolink 19 july 2021: New Made Ruf Bronze Exhaust Ring we make every size you need, Ducati 996 RS piston 98 mm pin 20 mm weight 410 gram
Photo copyright Herman Jolink 19 july 2021: Complete Used Layshaft Ducati Bevel Round Case and first Type Square Case 6 Dogs Good Condition
Photo copyright Herman Jolink 19 july 2021: Ducati Bevel 750 Round Case and 1st Type Square Case Gear Shift Drum part nr 0755 13 040 good Condition
Photo copyright Herman Jolink 19 july 2021: Ducati Bevel 1 Cylinder Headlight from a Ducati Kadet
Photo copyright Herman Jolink 19 july 2021: Ducati Bevel 750 Round Case Yellow Sport and Super Sport Green Frame, First Type Square Case 750 SS-900 SS Square Bosch 900 SS Clutch Control Rod Lenght 110 cm part nr 0796 54 990
Photo copyright Herman Jolink 19 july 2021: Ducati Bevel Square Bosch 900 SS and Darmah SD Tall Light part nr 0798 74 150
Photo copyright Herman Jolink 19 july 2021: Ducati Bevel 750 Round Case GT Yellow Sport and Super Sport Green Frame Forged 81.0 Piston pin 22 weight 415 gram
Photo copyright Herman Jolink 19 july 2021: Ducati Bevel Square Case Front and Back Cylinder with used 86 mm Borgo Pistons for 860 GT and GTS Darmah and 900 SS MHR 900 and 900 S 2, Good Condition no Broken Vins
Photo copyright Herman Jolink 19 july 2021: Ducati Bevel Round and Square Case Used Driving Disc Plates Steel part nr 0755 16 530
Photo copyright Herman Jolink 20 july 2021: Ducati Corse 996 RS piston 98 mm pin 20 weight 410 gram We can make every size Piston you need Give use a example piston we make it
Photo copyright Herman Jolink 20 july 2021: Left Pankl Titanium Connecting Rod Middle -Middle 124 mm Bigend 42 mm Small End 20 mm wide 20.5 mm right Ducati Cylinder 98 mm bore. If you need special parts ask us
Photo copyright Herman Jolink sep-oct 1998 Taghazoute (near Agadir) Maroc The Old Lady (Ducati Bevel Mille S 2) Herman Jolink and Mettje Spek (past away 4th june 2000 ) we where with the Old Lady 6 times in Maroc and back to the Netherlands on the road (not with a Train)
Photo copyright Herman Jolink 20 july 2021: Ducati Bevel Round Case 750 Yellow Sport and Super Sport Green Frame New Made Kickstart Lver part nr 0755 07 305
Photo copyright Herman Jolink 24 july 2021: Forged Piston for Ducati 1198 RS 106 mm pin 20 weight 457 gram, we make every size piston you and the weight you need
Photo copyright Herman Jolink 24 july 2021: Forged Piston for Ducati 999 RS 106 mm pin 20 weight 457 gram
Photo copyright Herman Jolink 24 july 2021: Herman Jolink at his Milling Machine making a hole from 19.5 mm in a 10 m thick steel plate, to fit on the turning help tool, to machining with the Milling machine a welded 400 F 3 Crankcase nice round
Photo copyright Herman Jolink 24 july 2021: Damage Gearbox from a Suzuki T 500 Race Bike, we make new bether and stronger gears for your gearbox, ask us
Photo copyright Herman Jolink 23 july 2021: Herman Jolink at his Lay machine make a special shaft to fix a steel plate in the middle from the turning Tool under the Milling
Photo copyright Herman Jolink 24 july 2021: Ducati Bevel Round Case 750 GT and Yellow Sport and Super Sport Green Frame , 1st Type Square Case 750 SS and 900 SS Darmah 860 GT and GTS New Made 5th Gear Z 31 on the Mainshaft with 6 High Dogs (wide shift Fork) bether than originial part nr 0755 16 040
Photo copyright Herman Jolink 24 july 2021: Ducati Bevel V-Twin 5th Gear Z 31 with 3 Dogs MHR Mille and Mille S 2 part nr 0905 16 060 and 900 SS Square with Bosch Ignition part nr 0799 16 040 MHR 90 and 900 S 2
Photo copyright Herman Jolink 24 july 2021: For Ducati Bevel V-Twin New Made 1st Gear Z 34 6 High Dogs on Layshaft part nr 0755 16 210 for 750 Round Case gt- Yellow Sport Super Sport Green Frame and 1st Type Square Case
Photo copyright Herman Jolink 25 july 2021: Ducati Bevel Square Case Darmah Gear Change Lever part nr 0799 13 020 Good Condition Hole Splaines 10 mm
Photo copyright Herman Jolink 25 july 2021: Ducati Bevel Round and Square Case Oil Plug M 22 x 1.5 part nr 0755 49 950 new
Photo copyright Herman Jolink 25th 2021: Ducati Bevel Single Oil Plug M 22 x 1.5 part nr 0521 49 953
Photo copyright Herman Jolink 25 july 2021: Ducati Bevel Square Case Clutch Control Rod part nr 0759 16 240 Lenght 113. mm
Photo copyright Herman Jolink 18 july 2021: Ducati Bevel Square Oilpump with newMade Pumpgear part nr 0759 70 210 Z 11, and Driving Gear Z 11 part nr 0759 70 240 Not Made in China
Photo copyright Herman Jolink 25 july 2021: Herman Jolink Shaft Straight an a Steel Plate
Photo copyright Herman Jolink 26 july 2021 :You need a Titanium Connecting Rod, ask us we make every size you need
Photo Herman Jolink 26 july 2021: twoo center konus, Allot sizes drillers from 1.5 till 13.5 Background All Special Tools i need to fit Bearings and Junk Ring in a Ducati Engine all Home Made
Photo copyright Herman Jolink 26 july 2021: For Ducati 1200 Bevel V-Twin with 90 Stroke and 92 Bore Forged Pistons 92 mm pin 22 mm weight 491 gram Longer Bevel Tubes for the longer stroke, Front and Back Cylinder with 25 Spcar we will make them the same model as the cylinder foot gaskets . Lnger Cast Iron Cylinder Sleeves
Photo copyright Herman Jolink 26 july 2021: Ducati Bevel Square 1st type crankcase , 1200 cc Crankshaft Home made ,started with 62 kilo s material Machined till 9.5 kilo with Carrilo Connecting Rods weight 430 gram, Special Made Longer Cylinder Tie Rod
Photo copyright Herman Jolink 26 july 2021: Crank Case Air Breavers Ducati Bevel V-Twin Round and Square Case, for 1 Cylinder wide case NOS Kickstarter shaft complete
Photo copyright Herman Jolink 26 july 2021: NOS Complete Kickstarter Shaft for Ducati 1 Cylinder Wide Case
Photo copyright Herman Jolink 26 july 2021: Ducati Bevel Square Case 1st Type, Back Cylinder Crankcase Fitting Top side New Made Crankshaft with Carrillo Connecting Rods, 90 Stroke and 92 bore is 1200 Bevel Ducati

EVENTS DRAGRACING TEAM HERMAN JOLINK 2021 CHANGES ARE POSSIBLE

23 may 2021 New made Kickstart Lever for Ducati Bevel Round Case 750 Yellow Sport and 750 Super Sport Green Frame

16 may 2021 New made Closing Rocker for Ducati Bevel V-Twin

5 dezember 2020 Herman Jolink,did 102 km with his Old Lady (Ducati Bevel Mille S2) temprature about 3 degrees celcius, me and my Old Lady did together 240.000 kilometer

 

2 dez 2020 Close Up NOS Front Cyl Head Ducati Bevel with new made Closing Rocker and NOS open rocker, Camshaft turns smooth

7 november 2020 selfie at my Lathe, background my Milling machine

6 november 2020, left Back Cylinder Head Ducati Bevel 750 GT -Yelloow Sport, Round Case with new in and exhaust valve seats, right Complete Back Cylinder Head new valve seats , new spark plug threat bush, new hard chromed Open Rockers new bearings to fit on the Ducati 750 GT round case engine build 1972

8 november 2020 Crankshaft Ducati 750 GT round case, new bigend pin needle bearings alu brons plates between crank half and Connecting rods, Balanced on 81.00 Forged J-E pistons

8 november 2020, Front and Back Cylinders with new 81.00 mm Forged J-E pistons, Cylinder Sleeves Honeyd at the right piston play

3 november 2020, New made Bronze Exhaust nuts, M 51.2 x 1.5-M 52.0 x 1.5-M 51.8 x 1.5, we can make every size you need

30 october 2020 selfie with my Old Lady (Ducati Bevel Mille S 2) get some food we did 55 km today

19-20 dez 2020 Central Classics we are there with allot Ducati Bevel parts for Ducati Bevel round and square case engines  Houten Netherlands

23 october 2020, Crankcase Ducati Bevel 750 Round Case together

 

24 october 2020 I get some sweet smillling red rooses In Dieren Netherlands and some food in the Netto Super Market in Isselburg Germany, my hart is singing wen i ride my Old Lady it whas yust 84 km but whas so nic so nice to ride my Ducati Bevel Mille S 2

 

24 octber 2020 making special tool to fit Junk ring in Marzocchi front fork leg Ducati Bevel 750 Round Case GT and Yellow Sport

 

Kickstarter Lever Ducati Bevel 750 GT build 1971 part number 303

Left front new made Clutch Cover for Ducati Bevel Square Case 75-76, middle Boge Monoschock from Ducati Belt 400-F 3, right Altenator Cover Ducati Round Case 750 GT build 1972, middle front Fork leg Ducati 750 F 1, Background left Crankshaft Ducati 750 Round Case GT-Yellow Sport, middle Front Cyl Head Ducati 750 Round Case with new valve seat and new inlet valve, right Clutch Cover Ducati 750 Round Case

NOS Kickstarter Ducati 750 Round Case 750 GT build 1971

New made for Ducati Bevel MHR-Mille S2 Crown Gear 0905 50 040, Sprocket on starter engine 0805 50 010, 5th August 2020

 

New made for Ducati Bevel Round and Square Case Mainshaft 0755 16 010, 5 august 2020

 

New made for Ducati Bevel Round and Square Case, 5th Gear on Mainshaft 6 high dog Copyright Herman Jolink  0755 16 040 (wide shift fork) 5th august 2020

 

New made for Ducati Bevel Square 5th Gear Z 31 on Mainshaft 3 Dog 0799 16 040- 5 august 2020

 

New made for Ducati Bevel Square 1st Gear Z 34 on Layshaft 6 High Dog Copyright Herman Jolink  0755 16 210- 5th august 2020

19-20 dezember Central Classics Meidoornkade 24-3992 AE Houten Netherlands Saterday 10.00-17.00 Sunday 10.00-16.00 Hal 2-stand 244 A :  with Ducati Bevel Parts and engines

Herman Jolink made Cylinder Foot Gaskets for Ducati Bevel 750 Round Case: 860-900 Square Case:  MHR Mille-Mille S2

18 july 2020 Herman Jolink with his Old Lady (Ducati Mille S 2 with 240.000 km under here wheels)

31 jan 1-2 feb  2020 Classic Motorshow Bremen Hal-1 C 141 Germany                                                                                       

8-9 feb 2020 Retro Wieze October Hallen Hal-1  stand W-227  Wieze Belgium                                                                                                                                                                     

8-9 ffebruary 2020 Retro Beurs Wieze Belgium Ducati Bevel 950 NCR replica Race Bike left Ducati 750 Bevel Round Case 750 GT build 1972 left Hyperpro steer schock absorbers made in Netherlands midlle Putoline Oil Motor Cycle products made in Netherlands

 

8-9 february 2020 Retro Beurs Wieze Belgium Herman Jolink on the Ducati Bevel 950 NCR replica Race Bike

 

8-9 february 2020 Retro Beurs Wieze Belgium background Ducati Bevel 750 GT build 1972 Petrol Tank and Side Covers Red-Black one Cylinder Sleeve with nikasil kompleet for Racing for 92 mm Piston Putoline Oil products made in Netherlands

 

8-9 february 2020 Retro Beurs Wieze Belgium organisator Yves Demanet with the first four cylinder motor bike ever build A Belgium made Gillet at Herstal

 

5 february 2020 Herman Jolink at his Milling machine making parts for the Back light indicator from his Trailer

 

Retro Wieze Belgium 8-9 february 2020 midlle Yves van Buylaere rider on a Ducati Bevel 750 GT round case between Ducati Bevel Parts

31 jan 2 feb 2020 Classic Motorshow Bremen Germany

 

For the 5th time present at the Classic Motor Show Bremen Germany

 

14 january 2020 Ducati Bevel S Cylinder Head 750 GT Round Case, midlle S Cyl Head right S Cyl Head

13 january 2020 Herman at the Milling Machine made the right hight from the distance piece under Ignition House Ducati Bevel 750 Round Case

12 january 2020 Zevenhuizen Netherlands New Year Meeting Ducati Club Nederland Herman Jolink with his Old Lady ( Ducati Bevel Mille S 2 ) 281 km in rain and storm

 

1-2 september 2018 Mosten Race Days Denmark Herman Jolink on the Ducati 1198 RS Drag Bike

Foto Luckau Germany 2009, Crew Chief Herni Evers set up the start Revs from the Ducati Drag Bike: Henri Evers Support the Dragracing Team Herman Jolink since 1984: Henri Past Away on 27th july 2018: Evers a real Evers Sutch a Evers is Doing his thing Yust he think that is the good way Henri want to do his thing Yumping over his own
Shadow Fighting whit him self Fighthing with instance Working more working Henri your work is done: copyright Herman Jolink

Saterday 23 november 2019 Neckarwestheim Germany Herman Jolink with his Old Lady (Ducati Bevel Mille S2) 545 km to ride to the Funeral from Peter Granica past away 21 november during a long ilnis, brain cancer, Peter Granica whas 48 years and did 16 year from it Dragracing with Home made Turbo Suzuki whitout wheelybar and with road tyre, Best on the 1/4 Mile (402 m) :7.550 sec with 306 kmh Sunday 24 november Herman Jolink ride back home with the Old Lady 536 km

Peter Granica Germany past away 21 november after a long Ilnis (brain cancer) Riding 16 years in the Super Street Bike Class with Home made Turbo Suzuki without wheelybar with street tire Best on the 1/4 Mile (402 m) 7.550 seconds with 306 kmh endspeed

23 november 2019 Neckarwestheim Germany After the Celbration from the Funeral from Peter Granica past away 21 november 2019 Brother Thomas Granica doing a Rolling Burn Out on the Super Street Bike from Peter, right a close friend from Peter,
Some words at the Funeral Celebration: I ame Herman Jolink riding in 2020 45th years Dragracing Are always a fread for the run   But at the start it is away I don t now if Peter whas a fread to ride  His best time on the 1/4 Mile (402 m) 7.550 seconds that is ferry good  Peter whas not the lightest   in the USA al the Super Street Bike riders are ferry light  His best end speed whas 306 kmh also ferry fast  Have haer that Peter whas building a new SSB Bike   Thomas : you mnust buil d the SSB Bike ready  Peter wil ride than with you  For ever Peter will ride with  you  copyright Herman Jolink

1-3 february we where for the 4th time at the Classic Motorshow Bremen Germany photo left Max Ruprecht 8 years a big fan from Herman Jolink right his father Olaf Ruprecht right Ducati Bevel Square 75-77 Ducati ignition with new made manifilds 40 mm, bevel house cover 750 round design with Ducati on it Low valve covers Alumium and Magnesium and Sprocket cover for Bosch Square Ducati Bevel Messing Exhaust Nuts we can made oversize threat

 

1-3 february 2019 Classic Motorshow Bremen Germany Ducati Bevel Parts for Square and Round Case also Mille parts and Ducati 1 cylinder pistons also for V-Twins   and we have allot contacts we do 45 years Ducati Bevel drive engines

 

Ducati 750 Round Case Crankcase with new bearings and lower bevel gears and  flangias Wetblasted

 

1-3 feb 2019 Classic Motorshow Bremen Germany Ducati Bevel Parts Roud Case Square Case 75-77 and Mille

 

1-3 feb 2019 Classic Motorshow Bremen Germany Ducati 750 round case crankcase and parts

 

14-17 february Motorbeurs on the stand from Oliehandel.NL   Hal 12-C32 Utrecht Netherlands

 

14-17 february 2019 we present for the 28th year at the Motorbeurs at Utrecht Netherlands on the photo with Hyperpro steer schock Absorbers made in the Netherlands

 

14-17 february Motorbeurs Utrecht Netherlands, photo Kees Siroo motorsport photographer

 

14-17 february 2019 Motorbeurs Utrecht Netherlands The Vink Family 2nd from left sohn from Henk Vink 3th from left the granddaughter from Henk Vink right daughter from Henk Vink 2nd from left daughter from Henk Vink in front the Ducati Panigale-1 Drag Bike the Team Jolink try to get it ready for 11-12 may 2019 Malmo Sweden (Henk Vink whas a fames Dragracer on Nitro Kawasaki it is allot years ago he past away)

 

14-17 february we present for the 28th year at the Motorbeurs Utrecht Netherlands in front Putoline high Quality Oil products made in the Netherlands, we can deliver al sizes of high Quality J-E psitons in 4 weeks

 

14-17 february 2019 we Exposure Ducati Bevel parts for Round Case and Square Case on our stand at the Motorbeurs at Utrecht Netherlands, we use long years the MJK saefty leather suite made in the Netherlands , also we use a Premier Helmeth and Style Martin Leather booths ,there where 85.000 vistors at the Motorbeurs 2019

 

24 february 2019 Herman Jolink made a Special Tool to put in the seal beheynd the front sprocket for the Ducati 1200 Bevel engine with the orginail Cylinders with longer Cylinder sleeves for the 90 stroke and 92 mm J-E pistons background Putoline Chain Spray DX 11 it stay on the chain also in heavy rain we test it with our Old Lady the Ducati Bevel Mille S 2

 

New made for Ducati Bevel Round Case and Square Case,in front  small Shift Selector fork 1- 2-5 Gear, background wide Shift Selector Fork 3-4 Gear

 

1 March 2019 Herman Jolink with Ducati Mille S2, with Aluminium Imola Tank 900 SS seat and 900 SS fearing

 

3 March Ducati Bevel Parts, left new made shift selector fork 1-2-5 gear, above shift selector fork 3-4 gear for Ducati Bevel Round and Square Case, for 40 mm Carb Inlet Trumpet, For Clutch Cover Round and Square and 1 Cyl Ducati Messing Nuts M 22 x 1.5 , Messing Exhaust Nuts oversize for Ducati V-Twin and 1 Cylindere, Torque Cams for Square Case Cam Cover Round Case Design with 900 on it Magnesium. Cam Cover last Type Mille, New 1 Cyl Cam Cover 350, Long Oilfilter for Round and Square Case Return Spring gearclock for Square Bosch and Round Case Gearclock

 

3 march 2019 left Herman Jolink right Andreas Lux he have allot Bevel Ducati s but he don t ride them that is a pitty. The first ride this year from Herman Jolink on the Old Lady (Ducati Mille S 2) 150 km in the rain , But it whas so nice The Old Lady was talking to me Ride me ride Lissen to me I now the way in live Lissen to me i show you the right way Copyright Herman Jolink

 

 

2 march 2019 Ducati Bevel Mille Crankshaft left the crank spindlle is broke of We wil repair it

 

27 dezember 2019 Crankshaft Ducati Bevel Mille with new made left spindle

16-17 march Technorama Kassel Germany

16-17 march 2019 Technorama Kassel Germany

 

 

Will de Graaf right on the Photo, 35 years Will de Graaf whas working at the Motor Cycle Magazin     Motor     Moto 73     and Classic and Retro Magazine    at   the Editorial office   6 months befor here   Retirement   she whas discharge   Past away thursday 14 march 2019   She whas 66 years.   Will will will    Forever will    Where will whas    There whas a way   Will oh will    Will whas the captain   Will Will Will   For you Will    Herman Jolink

5 april 2019  working at the Ducati Panigale-1 Drag Bike

16 april 2019 Ducati Panigale -1 Drag Bike Herman Jolink on the Ducati Panigale-1 Drag Bike get the right position for the body and the foot pegs

 

The 15th Ducati Bevel Day at Star Twin Loenen Netherlands  Herman Jolink with a 750 Round Case Crankshaft

 

15th Ducati Bevel Day at Star Twin Loenen Netherlands

20 april Ducati Bevel Day Star Twin Loenen Netherlands

2 may 2019 New magnesium backwheel for the Ducati Panigale-1 Drag Bike we made the rim wider to fit the 7 inch Mickey Thompson Drag Slick

Wednesday the 8th may we go to the 1st European Super Twin Top Gas Drag Race at Malmo Raceway Sweden, with a big Top Gas Field from 20 riders we wil start with the Ducati 1198 RS (1266) Drag Bike, 6 may monday and  7 may thuesday we wil work at the Ducati Panigale-1 Drag Bike try to get it ready for the 2nd Top Gas Drag Race 14-16 june Gardermoen Norway

11-2 may European Super Twin Top Gas and EDRS Malmo Sweden

1st European Super Twin Top Gas Drag Race Malmo Raceway Sweden 11-12 may 2019 Herman Jolink on the Ducati 1198 RS (1266) Drag Bike. Qualified 7th on the 1/8 Mile (201 m) with 4.117 sec with 202.8 kmh from 18 competitors in the Top Gas

 

 

11-12 May 2019 Malmo Race Way Sweden Sunday after the second round pulling back to the pits Herman Jolink get a big aplaus from the Top Gas Teams 1st round Jolink 5.431-201 kmh defete Schleichert De on 1340 H-D V-Rod Destroyer 6.322-175 kmh reaction Schleichert 0.152 Jolink 0.154 sec Then the 2nd round Menzi CH 2622 V-Twin special USA 4.556-239 kmh defete Jolink 5.450-201.7 kmh reaction Menzi 0.028 Jolink 0.119 sec European Super Twin Top Championship 1st Lymant Germany 940 points 2nd Albers Germany 720 3th Menzi Switserland 650 5th Jolink Netherlands 500 14th Heer Germany 310 then some riders with 300 points and some with 200 points 22 riders in Top Gas in 2019

24-24 may Ducati Club Race Assen Netherlands

Clutch Cover Ducati Bevel Square Bosch new may 2019

 

Kickstarter Ducati Bevel 750 GT 2nd Type Round Case may 2019

14-16 june Top Gas and Norwegian Bike Festival Gardermoen Norway

14-15 june 2019 Gardermoen Norway 2nd European Super Twin Top Gas Round 1st round Herman Jolink 8.508 sec with 240 kmh defete Jaakko Miettinen Fin 9.594 sec 220 kmh reaktion Jolink 0.099 sec Miettinen 0.128 sec The oldest rider in the Top Gas against the youngest rider Herman 64 and Jaakko 17 years a nice race and new pers best for Jaakko. Jolink get the 3th place form 18 riders 4th round Schack DK 7.479-274 kmh defete Jolink 8.495 -243 kmh reaction Jolink 0.055 sec Schack 0.116sec Top Gas Championship after 2 rounds 1st Lymant De 1725 points 2nd Schack DK 1235 points 3th Jolink NL 990 points 24th Godske DK 110 points  copyright Herman Jolink

 

Sunday 13 october 2019 Ducati Club Netherlands meeting Piramide van Austerlitz, Herman Jolink beheynd his Old Lady (Ducati Bevel Mille S 2)

 

Ducati Paralell Twin 500 Desmo Closing Shims allot diferent sizes

 

Ducati Bevel Mille Crankcase left above frame bolt hole welded, right frame bolt hole welded with holes and alu brons bushes to fit kickstarter spindle

 

19 october 2019 Herman Jolink put out with a home made spezial tool the lower bevel gear bearing bush from a Ducati Bevel 750 Round Case Crankcase

 

23 october 2019 Messing Plug M 22 x 1.5 AGIP F1 OLIO in Clutch Cover for Ducati Bevel 750 Round Case and Square Case, Cylnder Studbolt from good flexibel material Threath forced for Round Case Lenght 190 mm for Square Case Lenght 185 mm Bigendpin 36-36 for first type Square Case and 750 Round Case

 

5 november 2019 working at the Ducati Panigale-1 Drag Bike at Loenen Netherlands together with Kees van der Starre from Star Twin Techniek

 

5 november 2019 Hogeweide Netherlands Herman Jolink made a spezial tool to fit a bearing in the Clutch Cover from a Ducati Bevel Sqaure and Round Case

14 november 2019 Ducati Bevel Parts Round Case and Square Case front Mainshaft for Roudn and Square Case in a short time we have new made in stock left Originail Oil Pump house spindled out with new oversize oli gears the drive spindle is one pace with the oilgear Right Round Case Crankcase wetblasted nicer then from the Factory Lower bevel gears new bearings also in the crankcase new bearings and seals Cam Covers design round case with 900 on it

 

14 november 2019 Herman Jolink at the Lay Machine made a Spacer between the Special Screw in the backside from a Ducati Bevel Bosch left Crankcase,fore the fixing stift to secure the shift drum in each gear

14 november 2019 Herman Jolink with his Old Lady (Ducati Mille S 2 Bevel ) she has don now 240.000 km, on the seat an Ducati Bevel Crankcase, Cylinder Head, Cylinders and the valve covers wetblasted nicer the new                                                                                                                                                                                                                                                                                                                            14-15 dezember 2019  Central Classic with allot Ducati Bevel Parts and a Big Banner from Herman Jolink in action on the Ducati 1198 RS Drag Bike Houten Meidoornkade  Netherlands

 

18 november 2019 Hogeweide New originail Gearbox Ducati Bevel Mille, front mainshaft with new made geart shift fork 3-4 gear, background Layshaft with new made gear shift fork 1-2-5 gear

28 november 2019 Herman Jolink at the Lay machine , modified Lower Midlle Gear from Ducati Bevel 750 Round Case

4 dezember 2919 9 Rockers Ducati Bevel V-Twin and 1 Cylinder to machining the right radius and new hard chroming 2 gear shift fork 1-2-5 gear 1 gear shift fork 3-4 gear new made 3 indicator light cap Ducati Bevel 860 GT 1e type

4 dezember 2019 Ducati Bevel Round Case 750 GT-Yellow Sport front Brake Caliper with 2 time Ducati on it ferry rear

4 dezember 2019 Ducati Bevel MHR-Mille S 2 outside clutchcover new

 

4 dezember 2019 Ducati Bevel MHR-Mille S 2 inside Clutch Cover new

 

4 dezember 2019 Ducati Bevel MHR-Mille S 2 new Altenator Cover

 

4 dezember 2019 Ducati Bevel MHR-Mille S 2 new orginail steel clutch plates

 

4 dezember 2019 Ducati Bevel 1st type Square 75-76 and Bosch Aluminium Oil Filter Cap

 

4 dezember 2019 Ducati Bevel MHR Mille S 2 Crankshaft with Connecthing Rods balanced

 

4th dezember 2019 Ducati Bvevel MHR-MILLE S 2, new Oilpump with driving gear

17 november 2019 Frontwheel Ducati Bevel 750 Round Case GT-Yellow Sport  Rim Borrani 19 inch 4633

14-15 dez 2019 Central Classics Houten Netherlands Herman Jolink beheynd his Ducati Bevel Parts

Central Classics Houten Netherlands 14-15 dez 2019 lfet Herman Jolink in 2020 Dragracing 45 years on Ducati midlle Henny Kroeze World Championmship Speedway and Wall of Death right Speedway rider mane i don t now

14-15 dez 2019 Central Classics Houten NL left Jan de Rooij organiasator Motorbeurs and comment Road Race right Herman Jolink Ducati Bevel and almost 45 years Dragracing on Ducati

 

12 dezember 2019 Herman Jolink at his Lay machine making a new Bevel Tube for Ducati 750 Round Case

 

22 dezember 2019 Ducati Bevel 900 SS Square Case Bosch build 1979 with new made kickstarter by Herman Jolink

 

27 dezember 2019 Right New made Mainbearing Sleeves left Ducati Bevel Tubes for Round and Square case polishd and we put new chroom on it

Events Dragracing Team Herman Jolink, 2018 changing is possible

1-2 sep 2017 Mosten Race Days Allingaboro Denmark, 3th Place for Herman Jolink on the Ducati 1198 RS (1266) Drag Bike, European Super Twin Tin Gas Championship 2017, 5th Place for Herman Jolink, Czech Championship Competition Dragster 2nd Place for Herman Jolink

1-2 sep 2017 Mosten Race Days Allingaboro Denmark, 3th Place for Herman Jolink on the Ducati 1198 RS (1266) Drag Bike, European Super Twin Tin Gas Championship 2017, 5th Place for Herman Jolink, Czech Championship Competition Dragster 2nd Place for Herman Jolink

 

14 october 2017, Herman Jolink middle front , 2nd Place Czech Championship Competition Dragster Mlada Boleslav Czech Republic

14 october 2017, Herman Jolink middle front , 2nd Place Czech Championship Competition Dragster Mlada Boleslav Czech Republic

30 october 2017, Herman Jolink working at the Cylinder Head from the Ducati Panigale-1 Drag Bike

30 october 2017, Herman Jolink working at the Cylinder Head from the Ducati Panigale-1 Drag Bike

Fresh Polishd Clutch Cover Ducati Bevel 1975-1977 first type Square Case

Left Fresh Polishd Clutch Cover Ducati Bevel 1975-1977 first type Square Case, right Clutch Cover Ducati 750 Round Case with end peace from a Ducati Square Bosch, beheynd left Kickstarter Ducati 900 SS right kickstarter Ducati 750 Sport-SS Round Case

Possible Team Dates for 2018 13-14 january Oldtimer Motorcycle Exhebition Autotron Rosmalen Netherlands

13-14 january 2018 Oldtimer Motorcycle Exhebiton Herman Jolink for the stand from the Dragracing Team Herman Jolink

13-14 january 2018 Oldtimer Motorcycle Exhebiton Herman Jolink for the stand from the Dragracing Team Herman Jolink

13-14 january 2018 Oldtimer Motorcycle Exhebition Rosmalen Netherlands. left Roman Fokken Ducati 1 cylinder road and race riderMidlle Herman Jolink right Peter Horst Indina rider and friend from Hennie Kroeze Idian rider in his Wall of Death togheter with his daughter

13-14 january 2018 Oldtimer Motorcycle Exhebition Rosmalen Netherlands. left Roman Fokken Ducati 1 cylinder road and race rider Midlle Herman Jolink right Peter Horst Indian rider and friend from Hennie Kroeze Idian rider in his Wall of Death togheter with his daughter

13-14 january 2018 Rosmalen Netherlands, jong lady on the Ducati 1 cylinder 250 cc Motortrans made in Barcelona Spain, she has yust bought a Honda 250 bike, but she likes the Ducati 24 Horas

13-14 january 2018 Rosmalen Netherlands, jong lady on the Ducati 1 cylinder 250 cc Mototrans made in Barcelona Spain, she has yust bought a Honda 250 bike, but she likes the Ducati 24 Horas

13-14 january 2018 Rosmalen Netherlands jong lady on the Ducati 24 Horas 250 one cylinder Ducati she love the bike

13-14 january 2018 Rosmalen Netherlands jong lady on the Ducati 24 Horas 250 one cylinder Ducati she love the bike

13-14 january 2018 Rosmalen Netherlands Herman Jolink for the stand from the Dragracing Team Herman Jolink

13-14 january 2018 Rosmalen Netherlands Herman Jolink for the stand from the Dragracing Team Herman Jolink

13-14 january 2018 Rosmalen Netherlands Herman Jolink for the stand from the Dragracing Team Herman Jolink

13-14 january 2018 Rosmalen Netherlands Herman Jolink for the stand from the Dragracing Team Herman Jolink

COPYRIGHT HERMAN JOLINK     20 january Top Gas Meeting Hamburg Germany

20 january European Super Twin Top Gas Championship 2017, 5th Place for Herman Jolink

20 january 2018  European Super Twin Top Gas Championship 2017, 5th Place for Herman Jolink

2-3-4 february Classic Motorshow Hal 1-1 C 41 Bremen Germany

2-3-4 february 2018 Classicmotorshow Bremen Germany the Stand from the Dragracing Team Herman Jolink

2-3-4 february 2018 Classicmotorshow Bremen Germany the Stand from the Dragracing Team Herman Jolink

2-3-4 february 2018 Herman Jolink on the his stand at the Classicmotorshow Brmen Germany there where 50.000 visitors from hole Europe

2-3-4 february 2018 Herman Jolink on the his stand at the Classicmotorshow Bremen Germany there where 50.000 visitors from hole Europe

22-25 february Motorbeurs Hal 12-C 32  Utrecht Netherlands

22-25 february Motorbeurs Utrecht Netherlands the Dragracing Team Herman Jolink Exposure for the 26th time at the Motorbeurs now on the stand from Oliehandel.nl Herman Jolink in the midlle from the Promotien Ladys from Oliehandel.nl there where 90.000 Visitors

22-25 february 2018  Motorbeurs Utrecht Netherlands the Dragracing Team Herman Jolink Exposure for the 26th time at the Motorbeurs now on the stand from Oliehandel.nl Herman Jolink in the midlle from the Promotien Ladys from Oliehandel.nl there where 90.000 Visitors

22-25 february 2018 The Dragracing Team Herman Jolink Exposure for the 26th time at the Motorbeurs at Utrecht Netherlands right the Ducati 1198 RS Drag Bike left Ducati Bevel parts

22-25 february 2018 The Dragracing Team Herman Jolink Exposure for the 26th time at the Motorbeurs at Utrecht Netherlands right the Ducati 1198 RS Drag Bike left Ducati Bevel parts

22-25 february 2018 Motorbeurs Utrecht Netherlands the Ducati Bevel Parts on the stand from Dragracing Team Herman Jolink, left Kiskstarter for Ducati 750 Sport Round Case Dring gear for Oilpump 750 Round Case, Oilpump driving gear for Ducati Mille Bevel, 5e gearbox gear Z 22 6 high dogs first type Square Case Exhaust Nut M 52 x 1.5 we make every size you need right inside Clutch Cover Mille Sprocket Cover Mlle, NCR Dry Clutch fit on Bosch Square Case and Mille and Round Case

22-25 february 2018 Motorbeurs Utrecht Netherlands the Ducati Bevel Parts on the stand from Dragracing Team Herman Jolink, left Clutch Cover 75-77 Square Case,  Kickstarter for Ducati 750 Sport Round Case Dring gear for Oilpump 750 Round Case, Oilpump driving gear for Ducati Mille Bevel, 5e gearbox gear Z 22 6 high dogs first type Square Case Exhaust Nut M 52 x 1.5 we make every size you need right inside Clutch Cover Mille, Sprocket Cover Mlle, NCR Dry Clutch fit on Bosch Square Case ,Mille and Round Case Right above Crankshaft Mille with Carrillo Conrods

 

22-25 february 2018 Motorbeurs Utrecht Netherlands, left J-E Pistons for al Ducati Bevel, right Back Cylinder Head Ducati Bvevel 750 GT-Sport Round Case

22-25 february 2018 Motorbeurs Utrecht Netherlands, left J-E Pistons for al Ducati Bevel, right Back Cylinder Head Ducati Bevel 750 GT-Sport Round Case

26-28 may Ducati Club Race Assen Netherlands

Photo Exposition at the Ducati Club Race at Assen Netherlands 25-27 may 2018, Herman Jolink with his Ducati Bevel Drag Bike did a Show run in the rain, at the Ducati Club Race at Zolder Belgium sep 1986

Photo Exposition at the Ducati Club Race at Assen Netherlands 25-27 may 2018, Herman Jolink with his Ducati Bevel Drag Bike did a Show run in the rain, at the Ducati Club Race at Zolder Belgium sep 1986

25-27 may 2018 Ducati Club Race at Assen 40 year Celebration Ducati Club Netherlands, beheynd the Ducati 1198 RS Drag Bike middle Herman Jolink. left Sjaak Bakhuizen, right Joep v d brink the first members fromn the Ducati Club in 1978

25-27 may 2018 Ducati Club Race at Assen 40 year Celebration Ducati Club Netherlands, beheynd the Ducati 1198 RS Drag Bike middle Herman Jolink. left Sjaak Bakhuizen, right Joep v d Brink the first members from the Ducati Club in 1978

25-27 may 2018 Ducati Club Race Assen Netherlands, Dragracing Team Herman Jolink Exposure the Ducati 1198 RS Drag Bike and Ducati Bevel Parts

25-27 may 2018 Ducati Club Race Assen Netherlands, Dragracing Team Herman Jolink Exposure the Ducati 1198 RS Drag Bike and Ducati Bevel Parts

7-8-9-10 june Top Gas Speeddays King of Germany 1/8 Mile (201 m) Alkersleben Germany

8-10 june 2018 European Super Twin Top Gas Drag Race 1/.8 Mile (201 m) Alkersleben Germany

8-10 june 2018 European Super Twin Top Gas Drag Race 1/.8 Mile (201 m) Alkersleben Germany (South of Erfurt)

8-10 june 2018 European Super twin Top Gas Drag Race Alkersleben Germany Crew Chief Kralle Viehrig (Chemnitz Germany) starting up the Ducati 1198 RS Drag Bike. WE Qualified 5th from the 12 Top Gas riders, the track have not good grip. We did on the 1/8 Mile (201 m) 5.860 sec with 201 kmh with 5th gears, 60 foot (18 m) 1.459 (on a good track we do 1.2 on the 60 ft). Eleminations 1/8 Final Herman Jolink did 5.941 sec with 201 kmh def. Andreas Herr Germany on V-Twin 7.403-130 (Qualified with 6.399-174 kmh) Herr waiting ferry long to go in stage Jolink go then first in stage(wen you wait to long you get a red light) 1/4 final Olaf Menzi CH on 2622 Prostock V-Twin 5.396-216 kmh def Herman Jolink 5.864-201 kmh Rek Jolink 0.166 Menzi 0.288 Jolink ridng ferry konstant runs from 5.8 seconds Top Gas Championship after two rounds Jolink NL on the 4th Place with 520 points 1st Lymant De 1370 points last 15th Severa Czech Republic

8-10 june 2018 European Super Twin Top Gas Drag Race Alkersleben Germany Crew Chief Kralle Viehrig (Chemnitz Germany) starting up the Ducati 1198 RS Drag Bike. We Qualified 5th from the 12 Top Gas riders, the track have not good grip. We did on the 1/8 Mile (201 m) 5.860 sec with 201 kmh with 5th gears, 60 foot (18 m) 1.459 (on a good track we do 1.2 on the 60 ft). Eleminations 1/8 Final Herman Jolink did 5.941 sec with 201 kmh def. Andreas Herr Germany on V-Twin 7.403-130 (Qualified with 6.399-174 kmh) Herr waiting ferry long to go in stage Jolink go then first in stage(wen you wait to long you get a red light) 1/4 final Olaf Menzi CH on 2622 Prostock V-Twin 5.396-216 kmh def Herman Jolink 5.864-201 kmh Rek Jolink 0.166 Menzi 0.288 Jolink ridng ferry konstant runs from 5.8 seconds Top Gas Championship after two rounds Jolink NL on the 4th Place with 520 points 1st Lymant De 1370 points last 15th Severa Czech Republic

Saterday 9th june 2018 Dailynews paper ILM-Kries sonnabend 9th june 2018

Saterday 9th june 2018 Dailynews paper Ilm-Kreis sonnabend 9th june 2018

8-10 jun 2018 Alkersleben Germany 2nd Super Twin Top Gas round, left lane Herm,an Jolink on the Ducati 1198 RS Drag Bike fighting to get not cross midlle line leaning with his body to the left, right lane Petersen Germany on 1300 V-Rod Destroyer

8-10 jun 2018 Alkersleben Germany 2nd Super Twin Top Gas round, left lane Herman Jolink on the Ducati 1198 RS Drag Bike fighting to get not cross midlle line leaning with his body to the left, right lane Petersen Germany on 1300 V-Rod Destroyer

16-17 june Open House Oldtimer Reastauration and building replicas from old race cars Carrosseriejansen Wesepe-Olst Netherlands

Open House Bas Jansen Wesepe-Olst Netherlands Carrosseriebouw jansen Oldtomer Cars Restauration and building Classic Race Replica Cars Two fans from The Dragracing Team Herman Jolink leaning on the Ducati 1198 RS Drag Bike

Open House Bas Jansen Wesepe-Olst Netherlands Carrosseriebouw jansen Oldtomer Cars Restauration and building Classic Race Replica Cars Two fans from The Dragracing Team Herman Jolink leaning on the Ducati 1198 RS Drag Bike

16-17 june 2018 Open House Bas Jansen Wesepe-Olst Netherlands Ducati V-Twin Bevel engine, Kickstarter spindle 750 Round Case 2nd Type Lenght 315 mm Veglia rev counter 106 mm piston for the Ducati 1198 RS Drag Bike Standing Cylinder Head Ducati 750 GT-Yellow Sport Ruf Clutch Cover Bosch Square Case Ducati Mille Bevel inside Clutch Cover New gearbox Mille main and layshaft

16-17 june 2018 Open House Bas Jansen Wesepe-Olst Netherlands Ducati V-Twin Bevel engine, Kickstarter spindle 750 Round Case 2nd Type Lenght 315 mm Veglia rev counter 106 mm piston for the Ducati 1198 RS Drag Bike Standing Cylinder Head Ducati 750 GT-Yellow Sport Ruf Clutch Cover Bosch Square Case Ducati Mille Bevel inside Clutch Cover New gearbox Mille main and layshaft

We deliver al size J-E Pistons from the USA

We deliver al size J-E Pistons from the USA kickstarter 750 Round Case Sport and Super Sport Kickstarter Darmah  Clippons 750 Round Case Yellow Sport and Green Frame L Cover Rev Counter Ducati 750 Round Case Viglia Rev Counter 1-4 Kickstarter Spindle 2nd Type 750 Round Case lenght 315 mm Clippons Ducati 750 Round Case Yellow Sport and Green Frame

16-17 june 2018 Open House Bas Jansen right v d Plas Jaguar V12 is for sale build 1992 background Ducati 1198 RS Drag Bike from Dragracing Team Herman Jolink

16-17 june 2018 Open House Bas Jansen right v d Plas Jaguar V12 is for sale build 1992 background Ducati 1198 RS Drag Bike from Dragracing Team Herman Jolink

23-24 june Top Gas Dragday-1:   1/4 Mile (402 m) Hoskovice Czech Republic

23-24 june 2018 Hoskovice Czech Republic 3th European Super twin Top Gas Drag Race over the 1/4 Mile (402 m) Saterday 2 Qualie runs between the rain showers, the fine concrete track drying ferry fast fast Herman Jolink Qualified on 4th place with 9.054 sec with 239 kmh from the 8 competitors in the Top Gas. Sunday morning at the 3th Qualie run Jolink blow out his cylinder head gasket Jolink get help from two Czech to put in the spare Ducati engine in the frame the 999 RS (1214) But the time whas running out Before the first Elemination round The Jolink Team need the help from some more people But don t get it Some years a go at Drachten NL we did in one and a half hour our spare Ducati engine in the frame with help from 6 people

23-24 june 2018 Hoskovice Czech Republic 3th European Super Twin Top Gas Drag Race over the 1/4 Mile (402 m) Saterday 2 Qualie runs between the rain showers, the fine concrete track drying ferry fast fast Herman Jolink Qualified on 4th place with 9.054 sec with 239 kmh from the 8 competitors in the Top Gas. Sunday morning at the 3th Qualie run Jolink blow out his cylinder head gasket Jolink get help from two Czech to put in the spare Ducati engine in the frame the 999 RS (1214) But the time whas running out Before the first Elemination round The Jolink Team need the help from some more people But don t get it Some years a go at Drachten NL we did in one and a half hour our spare Ducati engine in the frame with help from 6 people

29 june 1 july Bikers Classics with Exposure the 1200 Blower Bevel Ducati Drag Bike Francorchamps Belgium

29 june 1 july 2018 Bikers Classic Francorchamps Belgium left Roger Kockelmann right Herman Jolink

29 june 1 july 2018 Bikers Classic Francorchamps Belgium left Roger Kockelmann right Herman Jolink

Bkers Classic Francorchamps Belgium Toshi from Japan ride at Francorchamps a Ducati Bevel Bosch Scquare

Bkers Classic Francorchamps Belgium Toshi from Japan ride at Francorchamps a Ducati Bevel Bosch Scquare

 

27-29 july Top Gas Main Event 1/4 Mile (402 m) Drachten Netherlands

27-29 july 208 4th European Super twin Top Gas round Drachten NL Herman Jolink Qualified on the 6th Place with 8.632 sec with 245 kmh from 12 riders Eleminations 1/4 Finale Jolink 8.556 sec with 252 kmh defete Malmberg 1/2 Final Jolink bye run Final 1st Place Jorg Lymant D 8.368 sec with 228 kmh 2nd Herman Jolink NL 8.789 sec 225 kmh closing the throtlle before the finisch

27-29 july 208 4th European Super Twin Top Gas round Drachten NL Herman Jolink Qualified on the 6th Place with 8.632 sec with 245 kmh from 12 riders Eleminations 1/4 Finale Jolink 8.556 sec with 252 kmh defete Malmberg 1/2 Final Jolink bye run Final 1st Place Jorg Lymant D 8.368 sec with 228 kmh 2nd Herman Jolink NL 8.789 sec 225 kmh closing the throtlle before the finisch

 

17-19 aug FIM and Top Gas NitrOlympx  1/4 Mile (402 m) Hockenheim Germany

17-19 aug 2018 Notrolympix Hockenheim Germany 6th European Super Twin Top Gas round Herman Jolink Qualiefied on the 8th Place with 8.723 sec with 246 kmh saterday morning a 8.801 sec with 255 kmh from 16 riders Sunday Eleminations 1/8 final Buehler winnig from Jolink with 0.0246 sec Jolink have a ferry good reaction at the start 0.018 seconds Top Gas Championship Jolink at the 5th Place with 1110 points

17-19 aug 2018 Nitrolympix Hockenheim Germany 6th European Super Twin Top Gas round Herman Jolink Qualiefied on the 8th Place with 8.723 sec with 246 kmh saterday morning a 8.801 sec with 255 kmh from 16 riders Sunday Eleminations 1/8 final Buehler winnig from Jolink with 0.0246 sec Jolink have a ferry good reaction at the start 0.018 seconds Top Gas Championship Jolink at the 5th Place with 1110 points At Hockenheim there where 41.000 spectators

17-19 aug 2018 Hockenheim Germany Team Tent left Herman Jolink working at the clutch from the Ducati Drag Bike right crew Chief Urs Brander Swiss

17-19 aug 2018 Hockenheim Germany Team Tent left Herman Jolink working at the clutch from the Ducati Drag Bike right crew Chief Urs Brander Swiss

31 aug 1 sep Top Gas 25th Mosten Race Days Sprint 1/8 Mille (201 m) Allingaboro Denmark

25th Mosten Race Days Allingaboro Denmark Herman Jolink in the Team Tent

25th Mosten Race Days Allingaboro Denmark Herman Jolink in the Team Tent Copyright Herman Jolink

25th Mosten Race Days Allingaboro Denmark a Sprint 1/8 Mile (201 m) with allot Live Music 8000 visitors from Scandinavie Germany Netherlands Belgium and on Herman Jolink Rolling Burn Out with the Ducati 1198 RS (1266) Drag Bike the spectators love the Ducati and my syl of riding the Jong Lady

25th Mosten Race Days Allingaboro Denmark a Sprint 1/8 Mile (201 m) with allot Live Music 8000 visitors from Scandinavie Germany Netherlands Belgium and so on,  Herman Jolink Rolling Burn Out with the Ducati 1198 RS (1266) Drag Bike the spectators love the Ducati and my style of riding the Jong Lady Copyright Herman Jolink

Jolink 5.479 sec with 203 kmh with allot body leaning to not go in the gardrail that cost time The years before we di 8 4 2 and than the winner that whas be bether for Herman Jolink

25th Mosten Race Days 31 aug 1 sep 2018 Allingaboro Denmark Sprint 1/8 Mile (201 m) Qualified 7th with 5.374 sec with 208 kmh from 17 riders in the Top Gas Class saterday a 8 field Drag Race System Jolink 7th against Schack 2nd , Jolink out the first round, Schack a 4.782 sec with 233 kmh with  Jolink 5.479 sec with 203 kmh Jolink did allot body leaning to go straight over the track that cost time.  European Super Twin Top Gas Championship 2018 Herman Jolink get the 5th Place from 22 riders  Copyright Herman Jolink

9 sep Ducati Scrambler Day Ducati Club Netherlands Heino Netherlands

8 sep 2018 Hogeweide Herman Jolink at the Lay machine making a tool to fit a seal in the Ducati 350 GTV Parallel Twin

8 sep 2018 Hogeweide Herman Jolink at the Lay machine making a tool to fit a seal in the Ducati 350 GTV Parallel Twin

9 sep 2018 Ducati Scrambler Day Ducati Club Netherlands Heino Netherlands right Herman Jolink left the Beloved Old Lady (Ducati bevel Mille S2) no don 240.000 km, bakcground some Ducati Bevel Parst and Putoline oil products all this stuff transported on the Old Lady

9 sep 2018 Ducati Scrambler Day Ducati Club Netherlands Heino Netherlands right Herman Jolink left the Beloved Old Lady (Ducati bevel Mille S2) now don 240.000 km, background some Ducati Bevel Parts and Putoline oil products all this stuff transported on the Old Lady

13 sep 2018 Hogeweide Herman Jolink bissy with the layshaft from the Ducati 350 GTC Parallel Twin

13 sep 2018 Hogeweide Herman Jolink bissy with the layshaft from the Ducati 350 GTV Parallel Twin

17 sep 2018 Ducati Heaven from Herman Jolink Crankcase Ducati Bevel Square 75-76 with home made crankshaft we started with 63 kilo s material wen she was ready we get left 9.5 kilo 90 strokewith Carrillo connecting Rods longer cylinder studs Background Cylinders home made with 92 mm pistons Ducati 1200 Bevel Left 90 mm J-E pistons, midlle 4th Sleeve gear Z 30 with 6 high dogs Flangia 750 round case left broken shift fork from 350 GTV Ducati Parallel Twin Ferry importent black thee with honey and a sweet smelling red rose

17 sep 2018 Ducati Heaven from Herman Jolink Crankcase Ducati Bevel Square 75-76 with home made crankshaft we started with 63 kilo s material wen she was ready we get left 9.5 kilo 90 stroke with Carrillo connecting Rods longer cylinder studs Background Cylinders home made with 92 mm pistons Ducati 1200 Bevel Left 90 mm J-E pistons, midlle 4th Sleeve gear Z 30 with 6 high dogs Flangia 750 round case left broken shift fork from 350 GTV Ducati Parallel Twin Ferry importent black thee with honey and a sweet smelling red rose

31-aug 1 sep 2018 25th Mosten Race Days Allinga boro Denmark Herman Jolink on the Ducati 1198 RS (1266) Drag Bike bakcground left crew chief Cees van Dongen, Photo copyright Piet Mom background Sponsors from Team Jolink by Dennis Brethouwer (MX-Stickers.nl) left ressults and best times Gumar

31-aug 1 sep 2018 25th Mosten Race Days Allingaboro Denmark Herman Jolink on the Ducati 1198 RS (1266) Drag Bike background right crew chief Cees van Dongen, Photo copyright Piet Mom background Sponsors from Team Jolink by Dennis Brethouwer (MX-Stickers.nl) left ressults and best times Gumar

21 sep 2018 Ducati Bevel Heaven ftom Herman Jolink tighthing the front chain sprocket then we shim out the gearbox from the Ducati Bevel Square Bosch V-Twin

21 sep 2018 Ducati Bevel Heaven ftom Herman Jolink tighthing the front chain sprocket then we shim out the gearbox from the Ducati Bevel Square Bosch V-Twin

21 sep 2018 Ducati Bevel Heaven Herman Jolink Lower bevel gears with bush Ducati Bevel 750 Round Case with new SKF bearings

21 sep 2018 Ducati Bevel Heaven Herman Jolink Originail Lower bevel gears with bush Ducati Bevel 750 Round Case with new SKF bearings

19 sep 2018 Hyperpro Werkendam Netherlands Factory from steer schock absobers front fork springs schockabsorbers back side form the bike Set up from your schock absorbers front and back side from your bike Photo copyright Herman Jolink left Ducati Panigale1299 customer midlle Ferry van de Wal designer form the Hyperpro schock absorbers right Hyperpro Team member Today at Hyperpro the Chinees Hyperpro Importeur talking with the chief form Hyperpro Peter van de Boogaard

19 sep 2018 Hyperpro Werkendam Netherlands Factory from steer schock absobers front fork springs schockabsorbers back side from the bike Set up from your schock absorbers front and back side from your bike Photo copyright Herman Jolink left Ducati Panigale 1299 customer midlle Ferry van de Wal designer from the Hyperpro schock absorbers right Hyperpro Team member Today at Hyperpro the Chinees Hyperpro Importeur talking with the chief form Hyperpro Peter van de Boogaard

3-7 oct INTERMOT Exposure and Show Runs with the Ducati Drag Bike Hal 10 -1 number 080 Koeln Germany

Intermot 2018 verkleind copyright Piet Mom and Team Jolink

2-7 october 2018 the Dragracing Team Herman Jolink Exopsure fore the 7th time at the INTERMOT in Koeln Germany , there where 220.000 visitors from 100 Countrys Saterday the 6th oct Herman Jolink did a Show Run with the Ducati 1198 RS Drag Bike on P1 the public love it

2-7 october 2018 the Dragracing Team Herman Jolink Exopsure fore the 7th time at the INTERMOT in Koeln Germany , there where 220.000 visitors from 100 Countrys Saterday the 6th oct Herman Jolink did a Show Run with the Ducati 1198 RS Drag Bike on P1 the public love it

2-7 october 2018 INTERMOT Koeln Germany Herman Jolink whas Interviewd on the podium with the Ducati 1198 RS Drag Bike

2-7 october 2018 INTERMOT Koeln Germany Herman Jolink whas Interviewd on the podium with the Ducati 1198 RS Drag Bike

Saterday 6 oct 2018 INTERMOT Koeln Germany Show Run from Herman Jolink with the Ducati 1198 RS Drag Bike

Saterday 6 oct 2018 INTERMOT Koeln Germany Show Run from Herman Jolink with the Ducati 1198 RS Drag Bike

Sunday 14 oct 2018 Ducati Club Netherlands Meeting Herman Jolink with his Ducati Bevel parts left the Ducati Mille S2 where we put on the Ducati Bevel Parst

Sunday 14 oct 2018 Ducati Club Netherlands Meeting Herman Jolink with his Ducati Bevel parts left the Ducati Mille S2 where we put on the Ducati Bevel Parst

 

Copyright Herman Jolink

Events Dragracing Team Herman Jolink 2017 Changes are possible

DSC_5946putoline verkleind copyright Herman Jolink 1-2 sep 2016 Mosten Denmark

1-2 september 2016 Mosten Race Days Denmark 1/8 Mile (201 m) Sprint

2nd Place for Herman Jolink on the Ducati 1198 RS (1266) Drag Bike in  European Super Twin Top Gas Championship photo Piet Mom

Ducati Bevel Square 1975-1976 with Ducati ignition Clutch Cover not Polished, Cam Cap 750 Round Case, Cam Cap 900 Square (design 750 round case) Flat Valve Covers 750 round case Aluminium and magnesium, Messing Exhaust Nut we can make evry oversize threat wat you need, Also we can make oversize trhreat in the Cylinder Head, Aluminium Inlet Manifolds 40 Dell Orto H-H 58

Ducati Bevel Square 1975-1976 with Ducati ignition Clutch Cover not Polished, Cam Cap 750 Round Case, Cam Cap 900 Square (design 750 round case) Flat Valve Covers 750 round case Aluminium and magnesium, Messing Exhaust Nut we can make every oversize threat wat you need, Also we can make oversize threat in the Cylinder Head, Aluminium Inlet Manifolds 40 Dell Orto H-H 58

2 october 1998 Taghazout Maroc, Ducati Mille S2 Bevel, we where thre for the 6th time Mettje Spek (past away 4th june 2000) and Herman Jolink

2 october 1998 Taghazout Maroc, Ducati Mille S2 Bevel, we where there for the 6th time Mettje Spek (past away 4th june 2000) and Herman Jolink

3-5 february 2017 Sprocket Cover Square Bosch, Bevel House Cap with Ducati on it for 750 round case also it looks nice on a Square case cylinder head

3-5 february 2017 Bremen Germany , Sprocket Cover Square Bosch, Bevel House Cap with Ducati on it for 750 round case also  it looks nice on a Square case cylinder head

 

3-5 feb 2017 Bremen germany, Gearclock Cover 750 round case new made, small gearshift forks, Head Light Diane 125 1 cylinder Ducati, Photo copyright  Team Jolink october 1990 Ducati Mille S2 Bevel road Turkogli-Narli East of Adana Turkey we reach the 100.000 km  Mettje Spek (past away 4th june 2000) and Herman Jolink, Messing Exhaust nuts V-Twin also we can make every oversize for 1 Cylinder Ducati Heads, Forged Piston new made for Ducati Mille 88 mm 440 gram we can deliver evry size piston what you need   you give us a example piston we made the size what you need New made Kickstarter 900 SS Square in ashort time we have a new made kickstarter for Ducati 750 Sport-SS round case, Forged Piston Blanc for 106 mm piston for Ducati 1198 RS

3-5 feb 2017 Bremen Germany, Gearclock Cover 750 round case new made, small gearshift forks, Head Light Diane 125 Ducati 1 cylinder , Photo copyright Team Jolink october 1990 Ducati Mille S2 Bevel, road Turkogli-Narli East of Adana Turkey we reach the 100.000 km Mettje Spek (past away 4th june 2000) and Herman Jolink, Messing Exhaust nuts V-Twin also we can make every oversize for 1 Cylinder Ducati Heads, Forged Piston new made for Ducati Mille 88 mm 440 gram we can deliver every size piston what you need you give us a example piston we made the size what you need New made Kickstarter 900 SS Square in ashort time we have a new made kickstarter for Ducati 750 Sport-SS round case, Forged Piston Blanc for 106 mm piston for Ducati 1198 RS

3-5 feb 2017 Bremen Germanyleft Clippons for 750 round case lenght 270 and Square lenght 290 mm, Left gearshift pedal MHR Square and Mille, Kickstarter Darmah originail, Front Bevelhouse Cap Veglia 1-2 originail new, Veglia revs Clock 1-4  for V-Twin and 1 Cylinder replica, Bevelhouse Cap for 1 Cylinder for revsclock originailoriginail , Forged Piston for Ducati 750 round case GT-Sport-SS pin 22 mm we deliver every size you need in  3-4 weeks, Clutch Cover Square 1975-1976 Ducati ignition with messing Nut AGIP OLIO and inspection cover not polished, Square Bosch Sprocket Cover with clutchcabel arm Alumnium not Polished also Bosch Sprocket Cover from Magnesium, Mille S2 bakc indicator, Aluminum Inlet trumpet size  yust originail  for 40 Dell Orto with threat on both side

3-5 feb 2017 Bremen Germanyleft Clippons for 750 round case lenght 270 and Square lenght 290 mm, Left gearshift pedal MHR Square and Mille, Kickstarter Darmah originail, Kickstarter Square 900 SS  replica, Piston 92 mm pin 20 mm Top Unmachined, Front Bevelhouse Cap Veglia 1-2 originail new, Veglia revs Clock 1-4 for V-Twin and 1 Cylinder replica, Bevelhouse Cap for 1 Cylinder for revsclock originail , Forged Piston for Ducati 750 round case GT-Sport-SS pin 22 mm we deliver every size piston you need in 3-4 weeks, Clutch Cover Square 1975-1976 Ducati ignition with messing Nut AGIP OLIO and inspection cover not polished, Square Bosch Sprocket Cover with clutchcabel arm Alumnium not Polished also Bosch Sprocket Cover from Magnesium, Mille S2 bakc indicator, Aluminum Inlet trumpet size yust originail for 40 Dell Orto with threat on both side, Left above Piston for Ducati 999 RS 2004

14-15 januari Classic Motor Cycle Exhibition Rosmalen Netherlands

2-5 february Classic Motorcycle en Car Exhibition Bremen Germany

23-26 February Motorbeurs Hal 10- B 013 the Dragracing Team Herman Jolink Exposure for the 25th time at the Motorbeurs at  Utrecht Netherlands

11 March Top Gas Meeting, then the Top Gas Riders desid where we wil come at the Start in the year 2017        Molln Germany

15 april Ducati Bevel Day at Star Twin  Loenen Netherlands

Saterday 15 april 2017 Ducati Bevel Day at Star Twin Netherlands. Herman jolink ligging for the Ducati 1198 RS Drag Bike on the body new  Special Paint bij Moto Paint  Kruisland by Cees v d Bosch. and  Promoting the new Oil Sponsor,  Putoline Motorcycle Oil made in the Netherlands

Saterday 15 april 2017 Ducati Bevel Day at Star Twin Netherlands. Herman Jolink laying for the Ducati 1198 RS Drag Bike on the body new Special Paint bij Moto Paint Kruisland by Cees v d Bosch. and Promoting the new Oil Sponsor, Putoline Motorcycle Oil made in the Netherlands also the Team Jolink having in Oliehandel.nl a new sponsor also we wil ride in2017 with a PREMIER HELMET copyright Herman Jolink

6-7 may Drag Day-1  we wil ride in the Competition Bike Class Hoskovice Czech Republic

6-7 may 2017 Dragday-1 Hoskovice Czech Republic, 2nd Palce in Competiton Bike vor Herman Jolink on the Ducati 1198 RS Drag Bike, from the 7 riders. with registration from Czech TV

6-7 may 2017 Dragday-1 Hoskovice Czech Republic, 2nd Place in Competiton Bike vor Herman Jolink on the Ducati 1198 RS Drag Bike, from the 7 riders. with registration from Czech TV

6-7 may 2017 Drag Day-1 Hoskovice Czech Republic

6-7 may 2017 Drag Day-1 Hoskovice Czech Republic

13-15 may European Super Twin Top Gas Championship Malmo Sweden

25-28 may Ducati Club Race Assen Netherlands

25-28 may 2017 Ducati Club Race Assen Netherlands, Exposure the Ducati 1198 RS Drag Bike, and Ducati Bevel Parts

25-28 may 2017 Ducati Club Race Assen Netherlands, Exposure the Ducati 1198 RS Drag Bike, and Ducati Bevel Parts

25-28 may Ducati Club Race Assen Netherlands, Exposure the Ducati 1198 RS Drag Bike and Ducati Bevel Parts

25-28 may Ducati Club Race Assen Netherlands, Exposure the Ducati 1198 RS Drag Bike and Ducati Bevel Parts

3-6 june Top Gas Malmo Sweden

3-4 june 2017 Malmo Raceway Sweden, Herman Jolink  on the Ducati 1198 RS Drag Bike, from 10 riders in the Top Gas Class Qualified 4th place on thew 1/8 Mile (201 m) with 5.223 sec with 208 kmh ,and a new pers best time from 0.173 sec on the 60 foot (18 m) old  best 60 ft : 0.185 second. Sunday now DRag Race because of rain. After two Top Gas Rounds we are on the 4th place in the Top Gas Championship

3-4 june 2017 Malmo Raceway Sweden, Herman Jolink on the Ducati 1198 RS Drag Bike, from 10 riders in the Top Gas Class Qualified 4th place on thew 1/8 Mile (201 m) with 5.223 sec with 208 kmh ,and a new pers best time from 1.173 sec on the 60 foot (18 m) old best 60 ft : 1.185 second. Sunday now Drag Race because of rain. After two Top Gas Rounds we are on the 4th place in the Top Gas Championship

1-2 sep Mosten Race Days with allot Live Music 1/8 Mile (201 m) Sprint Allingaboro Denmark

1-2 sep 2017 Mosten Race Days, Allingaboro Denmark, 1/8 Mile (201 m) Sprint 3e Place from 18 riders in the Top Gas Class, Herman Jolink on the Ducati 1198 RS Drag Bike, now on the 5th Place in the European Super Twin Top Gas Championship, 8000 spectatorsfrom Norway, Sweden, Denmark Germany Netherlands, Joik did a best time from 5.385 seconds with 207 kmh on the 1/8 Mile (201 m)

1-2 sep 2017 Mosten Race Days, Allingaboro Denmark, 1/8 Mile (201 m) Sprint 3e Place from 18 riders in the Top Gas Class, Herman Jolink on the Ducati 1198 RS Drag Bike, now on the 5th Place in the European Super Twin Top Gas Championship, 8000 spectators from Norway, Sweden, Denmark ,Germany, Netherlands,Belgium, Jolink did a best time from 5.385 seconds with 207 kmh on the 1/8 Mile (201 m)

1-2 sep 2017 Mosten Race Days Allingaboro Denmark, 3th Place  from 18 competitors in the Super Twin Top Gas, fore Herman Jolink on the Ducati 1198 RS Drag Bike, 1/8 Mile (201 m) 5.385 seconds with 207 kmh best 600 foot (18 m)  1.243 second (0-100 kmh)

1-2 sep 2017 Mosten Race Days Allingaboro Denmark, 3th Place from 18 competitors in the Super Twin Top Gas, fore Herman Jolink on the Ducati 1198 RS Drag Bike, 1/8 Mile (201 m) 5.385 seconds with 207 kmh best 600 foot (18 m) 1.243 second (0-100 kmh)

1-2 sep 2017 Mosten Race Days Allingaboro Denmark, left 2nd Place Jorg Lymant Germany, Middle 1st Cord Albers Germany, Right 3th Place Herman Jolink

1-2 sep 2017 Mosten Race Days Allingaboro Denmark, left 2nd Place Jorg Lymant Germany, Middle 1st Cord Albers Germany, Right 3th Place Herman Jolink Netherlands

10 september Italo Fruhstuck Nortmoor (near Leer)  North Germany

10 september 2017 Italo Fruhstuck Nortmoor (near Lear) North Germany right Herman jolink with his Ducati Mille S2 Bevel road bike with 230.00 km, with some Ducati Bevel Parts

10 september 2017 Italo Fruhstuck Nortmoor (near Lear) North Germany right Herman Jolink with his Ducati Mille S2 Bevel road bike with 230.00 km, with some Ducati Bevel Parts, Herman put al the Bevel Parts on the back from the Ducati Mille S2 Bevel build 1985

15-16-17 september Ducati Bike Meeting Thal for the 34th year South from Munchen Germany

15-16-17 september 2017 Ducati Meeting Thal south from Munchem Germany for the 34th year by Ducati Club Munchen, Herman Jolink right behynd his Ducati Bevel Parts

15-16-17 september 2017 Ducati Meeting Thal south from Munchem Germany for the 34th year by Ducati Club Munchen, Herman Jolink right beheynd his Ducati Bevel Parts

20-21 sep Open House at Doetam 17.00-22.00 ,. after sales car parts workshop tools and so on , Putoline Motorcycle Oils, we Exposure the the Ducati 1198 RS Drag Bike and wil start it up, Doetam Voltastraat 75-7006 RT Doetinchem Netherlands

20-21 september 2017 Open House Doetam After Sale Car Parts and Woirkshop equiment , Exposure the Ducati 1198 RS Drag Bike and started it up

20-21 september 2017 Open House Doetam Doetinchem Netherlands After Sale Car Parts and Workshop equiment , Exposure the Ducati 1198 RS Drag Bike and started it up

20-21 september 2017 Open House Doetam Doetinchem Netherlands, Ducati  Square Bevel Engine 1975-1977 with Ducati ignition, new made Clutch cover, cam cover 750 round case, came cover (round Case ) with 900 on it

20-21 september 2017 Open House Doetam Doetinchem Netherlands, Ducati Square Bevel Engine 1975-1977 with Ducati ignition, new made Clutch cover, cam cover 750 round case, came cover (round Case ) with 900 on it, Messing Exhaust nut we make  every size wire, Inlet Manifold for 40 mm Dell Orto Carbs

20-21 september 2017 Vakbeurs Doetam ,Open Huese after sale Car Parts and Tools fote in the Workshop Doetinchem Netherlands

20-21 september 2017 Vakbeurs Doetam ,Open House after sale Car Parts and Tools fore in the Workshop Doetinchem Netherlands, Herman Jolink beheynd the Ducati 1198 RS Drag Bike

29-30 sep 1 oct Weekend of the Champions Quartermile Drachten Netherlands

29-30 sep 2017 Eekend of the Champions Drachten Netherlands, Super Twin Top Gas 1st Place for Herman Joink on the Ducati 1198 RS (1266) Drag Bike on the 1/4 Mile (402 m) 8.662 sec with 231 kmh, 60 foot (18 m) 1.210 seconds

29-30 sep 2017 Eekend of the Champions Drachten Netherlands, Super Twin Top Gas 1st Place for Herman Joink on the Ducati 1198 RS (1266) Drag Bike on the 1/4 Mile (402 m) 8.662 sec with 231 kmh, 60 foot (18 m) 1.210 seconds

29-30 sep 1 oct 2017, Weekend of the Champions Drachten Netherlands Super Twin Top Gas 1st Place for Herman jolink on the Ducati 1198 RS (1266) Drag Bike)

29-30 sep 1 oct 2017, Weekend of the Champions Drachten Netherlands Super Twin Top Gas 1st Place for Herman Jolink on the Ducati 1198 RS (1266) Drag Bike)

14 october 2017 Prizegiving Czech Championship  Drag Bikes Mlada Boleslav Czech Republic at Ducati Dealer Moto Rosso

14 october 2017, Prizegiving Czech Championship Drag Bike: 2nd Place Competiton DRagster Herman Jolink on Ducati 1198 RS Drag Bike,  1st Luc Raeymakers Belgium on 1400 NOS Kawasaki

14 october 2017, Prizegiving Czech Championship Drag Bike: 2nd Place Competiton DRagster Herman Jolink on Ducati 1198 RS Drag Bike, 1st Luc Raeymakers Belgium on 1400 NOS Kawasaki

14 october 2017 Mlada Boleslav Czech Republic, 2nd Palce for Herman Jolink in the Competion Dragster on the Ducati 1198 RS Drag Bike

14 october 2017 Mlada Boleslav Czech Republic, 2nd Place for Herman Jolink in the Competion Dragster on the Ducati 1198 RS Drag Bike

15 october 2017, Rondje Vallende Bladeren Meeting from the Ducati Club Netherlands, Herman Jolink beheynd his Ducati Bevel Parts, al the parts on the back from the Ducati  Mille S2 Bevel , nice Sunshine weather with allot Ducati riders

15 october 2017, Rondje Vallende Bladeren Meeting from the Ducati Club Netherlands, Herman Jolink beheynd his Ducati Bevel Parts, al the parts on the back from the Ducati Mille S2 Bevel , nice Sunshine weather with allot Ducati riders

3 dezember Retro Beurs Exposure 24 Horas Mototrans Ducati 250 cc one cylinder build 1972  and Ducati Bevel Parts  Aarschot Belgium

7 oct 2017 24 Horas Mototrans Ducati 250 cc one cylinder build 1972 in Barcelona Spain

7 oct 2017  Doetinchem Netherlands, 24 Horas Mototrans Ducati 250 cc one cylinder build 1972 in Barcelona Spain we wil take the Bike tot the retro Beurs at Aarschot Belgium

Copyright Herman Jolink